MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Switch to mobile style


Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 
  Previous topic | Next topic 
Author Message
Vorian
 Post subject: HM321HI stays busy
PostPosted: January 2nd, 2012, 9:47 
Offline

Joined: December 2nd, 2010, 6:07
Posts: 35
Location: Belgium
Hi,

I have this HM321HI that stays BSY. Terminal log is

Code:
*PA VID=0007 PN=0000 Rev=0004
*PA VID=0007 PN=0000 Rev=0004
ChipRev = 63B0
U
S_0Shock Sensor Circuit Enabled
SO_1
Shock Sensor Circuit Enabled
IS=5
CLA #36/37
Handoff RPM=576
SPOK
mS1 00000003
A1O=117 A1G=418
O=513 S=-1
SK C:  4463 H:0
Zh:00000080 Curr:000000D5
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000D5
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000E7
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000E5
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000D5
Zh:00000080 Curr:000000FA
Zh:00000080 Curr:000000C5
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000C5
Zh:00000080 Curr:000000C7
Zh:00000080 Curr:000000E5
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000D5
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000D5
Zh:00000080 Curr:000000D5
Zh:00000080 Curr:000000D7
Zh:00000080 Curr:000000E7
Zh:00000080 Curr:000000D7
Zh:00000080 Curr:000000E5
Zh:00000080 Curr:000000D5
Zh:00000080 Curr:000000D6
Loaded FIT ( 0: 0: 1)
Zh:00000080 Curr:000000D7
Zh:00000080 Curr:000000D5
Zh:00000080 Curr:000000D7
Zh:00000080 Curr:000000D7
Zh:00000080 Curr:000000E4
Zh:00000080 Curr:000000D4
Zh:00000080 Curr:000000E5
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000F6
Zh:00000080 Curr:000000C7
Zh:00000080 Curr:000000D5
Zh:00000080 Curr:000000D7
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000C6
Zh:00000080 Curr:000000C6
Zh:00000080 Curr:000000E6
Zh:00000080 Curr:000000D7
Zh:00000080 Curr:000000D7
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000E7
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000E6
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000D6
|   4 | MLIST    |  0 | 0 |   10 | 1340 |
CalibTable Loaded. Rev:0x17
ResoTable Loaded. Rev:0x01
RRO1xTable Loaded. Rev:0x01
Zh:00000062 Curr:000000B7
Zh:00000062 Curr:000000A6
Zh:00000062 Curr:000000A5
Zh:00000062 Curr:0000009B
Zh:00000062 Curr:00000083
Zh:00000062 Curr:000000A6
Zh:00000062 Curr:000000A4
Zh:00000062 Curr:00000096
Zh:00000062 Curr:00000083
Zh:00000062 Curr:000000A6
Zh:00000062 Curr:000000A6
Zh:00000062 Curr:00000098
| 157 | PARAM_DM |  0 | 0 |  167 | 1140 |
Zh:00000062 Curr:000000FD
Zh:00000062 Curr:00000086
Zh:00000062 Curr:000000A6
Zh:00000062 Curr:000000A7
Zh:00000062 Curr:000000A7
Zh:00000062 Curr:000000A6
Zh:00000062 Curr:000000B6
Zh:00000062 Curr:000000B6
Zh:00000062 Curr:000000B5
Zh:00000062 Curr:000000B6
Zh:00000062 Curr:000000B6
Zh:00000062 Curr:00000097
Zh:00000062 Curr:000000A7
Zh:00000062 Curr:000000A6
Zh:00000062 Curr:000000A6
Zh:00000062 Curr:000000A6
Zh:00000062 Curr:000000A6
Zh:00000062 Curr:000000A6
Zh:00000062 Curr:000000A5
Zh:00000062 Curr:000000B6
Zh:00000062 Curr:000000B6
Zh:00000062 Curr:000000B5
Zh:00000062 Curr:00000095
Zh:00000062 Curr:00000086
Zh:00000062 Curr:000000A6
Zh:00000062 Curr:000000A6
Zh:00000062 Curr:000000A6
Zh:00000062 Curr:000000A6
Zh:00000062 Curr:000000A5
Zh:00000062 Curr:000000A7
Zh:00000062 Curr:000000B5
Zh:00000062 Curr:000000B7
Zh:00000062 Curr:000000B7
| 115 | MOVLY001 |  1 | 0 |   10 | 1340 |
Zh:00000063 Curr:00000091
Zh:00000063 Curr:00000099
Zh:00000063 Curr:000000A7
Zh:00000063 Curr:000000A6
Zh:00000063 Curr:000000A9
Zh:00000063 Curr:00000092
Zh:00000063 Curr:00000095
Zh:00000063 Curr:000000A7
Zh:00000063 Curr:000000A6
Zh:00000063 Curr:000000A9
Zh:00000063 Curr:00000091
Zh:00000063 Curr:00000098
Zh:00000063 Curr:000000B6
Zh:00000063 Curr:000000A5
Zh:00000063 Curr:000000A9
| 115 | MOVLY001 |  1 | 1 |   10 | 1140 |
Overlay file read bad

[P_ABORT:04007B04:10063BA8]@0
L:04006000 A0A0A0A0 A0A0A0A0 A0A0A0A0 A0A0A0A0
L:04006010 A0A0A0A0 A0A0A0A0 A0A0A0A0 A0A0A0A0[/size]


Heads or bad modules?

Thank you
Top
 Profile  
 
dmarques
 Post subject: Re: HM321HI stays busy
PostPosted: January 2nd, 2012, 10:08 
Offline

Joined: November 6th, 2006, 6:58
Posts: 1752
Seems that cannot read anything, so I would go for heads.
Have you tried hotswap?
Top
 Profile  
 
BlackST
 Post subject: Re: HM321HI stays busy
PostPosted: January 2nd, 2012, 17:55 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
No no ! :rtfm: something is read.

The problem is ELSEWHERE or a bit more complex :mrgreen:
Top
 Profile  
 
Vorian
 Post subject: Re: HM321HI stays busy
PostPosted: January 3rd, 2012, 3:34 
Offline

Joined: December 2nd, 2010, 6:07
Posts: 35
Location: Belgium
This drive was part of a lot of donnors i bought. I don't have the tools to access the mc nor do i have a matching donnor. Blackst, could you give a little hint, just for my personnal knowledge :D ?
Top
 Profile  
 
BlackST
 Post subject: Re: HM321HI stays busy
PostPosted: January 3rd, 2012, 3:59 
Offline

Joined: July 18th, 2006, 3:05
Posts: 7476
Location: ITALY
Sorry , no.
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 111 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group