Some times you can't find the same pcb number for WD so you can use one of these alternates
************************************
Notes: all these alternatives pcb are tested
*************************************
1-701590 you can use 701537

2-771590 you can use 701590

3-701267 you can use 701266 rom swap needed

4-701567 you can use 701537.

5-701596 you can use 701590 or can use 701537

6-701477 you can use 701444

_________________
Tawfeek Mokhtar
http://alsafwapc.net
Alsafwa Data Recovery Egypt

Helpful

tawfeek_mokhtar, thank you!
How about xx1622 (Mars)?

Does this mean that 701537, 701590, 771590, 701567, and 701596 are all interchangeable?

_________________
A backup a day keeps DR away.

@fzabkar
yes

yes it's all the same and you can chang every one with another

_________________
Tawfeek Mokhtar
http://alsafwapc.net
Alsafwa Data Recovery Egypt

nothing yet about this pcb .i will inform you with any new news

_________________
Tawfeek Mokhtar
http://alsafwapc.net
Alsafwa Data Recovery Egypt

Thanks, good job.

_________________
http://www.northwind.gr
SandForce SSD Recovery
Ransomware Reverse Engineering - NoMoreRansom! partners

701635 usb interface , you can use 701572
701508 you can us 701494

_________________
Tawfeek Mokhtar
http://alsafwapc.net
Alsafwa Data Recovery Egypt

Very good. Thanks for the Info.

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner

thanks
i hope every one found an alternative pcb for any model "from the work experience" to share it here.

_________________
Tawfeek Mokhtar
http://alsafwapc.net
Alsafwa Data Recovery Egypt

Well Done...

_________________
Kuwait Data Recovery - UNIX GTC
The only reason for time is so that everything doesn't happen at once. By: Albert Einstein

701292 you can use 701293

701130 you can use 701252

thank you for sharing your knowledge

Hi,
Unfortunately, not all the informations given here are true

4-701567 you can use 701537
This two PCBs are NOT compatible (interchangeable)
In another way are wired the signals in the connector J1
701537 -> J1 pin 1 is connected to GND
701567 -> J1 pin 2 is connected to GND

1-701590 you can use 701537
These two PCBs are interchangeable only in very few cases !!!
Not all versions of the ROMs are suitable for both PCBs

Mikippp

I'm very sure that 701567 you can use 701537

&

I'm very very sure that 701590 you can use 701537. it's the same but with memory chip i use tht in ALL CASES

you can try first and then kindly report here

_________________
Tawfeek Mokhtar
http://alsafwapc.net
Alsafwa Data Recovery Egypt

Hi,
Take a multimeter and see where on the connector J1 is GND at 701567 and at 701537 !!!
Or maybe you meant about 701577 and not 701567

Yes, they are versions of the ROM that will work both on 88i8846-TFJ2 MCU and on 88i8845D-BHG2 MCU
For example - Atlantis ROM 05APE_04AD

There are also versions of the ROM which saved to the PCB equipped with another model of the MCU kills PCB (works only j-tag and tiny console)
For example - Pinnacle ROM 052JA_0427 written to the PCB with MCU 88i8846-TFJ2 kills PCBs

PS Even not all models of the 701590 PCBs are compatible
2060-701590-000 REV A - MCU 88i8846-TFJ2 (internal ROM) and
2060-701590-001 REV A - MCU 88i8846E-TFJ2 (external ROM)
are completely incompatible with each other

Mikippp

i have got 701615 (usb interface) possible replace with a SATA one (?)

You can use as example 701499, from Denali series.

MR.Mikippp
i Know exactly what are you talking about and from work experience let me say again
you can use 2060-701590-000 REV A - MCU 88i8846-TFJ2 (internal ROM) instead of 2060-701590-001 REV A - MCU 88i8846E-TFJ2 (external ROM)
and moreover you can use 1537 instead of them both . just try it as pcb swap and i'm more than sure that i do that every day

_________________
Tawfeek Mokhtar
http://alsafwapc.net
Alsafwa Data Recovery Egypt