Hi all i have a little problem whit my hdd.
Yesterday i reverse plugged the sata power adaptor and burn one little component on the pcb.

http://kwnetx.net/img/share/PCB-STM3160211AS.jpg

Some one know how i can replace it??

search for TVS and u will have the answer.

_________________
__________
There is no substitute for education and experience
THANK YOU
SHAHI
shahi.mahbub@gmail.com

it's like zenner diode

Ok, i need to make working this disk for max 30 minutes, just the time for transfer my C++ and Java projects.

For you it's a good idea if i bypass it with a wire?

Sicuro di aver letto e capito? (per la domanda...)
Are you sure you read and understood? (because of last question...)

Ho capito si ma al contrario... Devo rimuoverlo dato che la funzione e di scarico dalla sovratensione, in teoria e in pratica non succede nulla anche se lo faccio andare per un pò senza,,
Se lo bypassavo mi esplodeva in faccia tutta la pcb

My english is every new day little worse

I understood the opposite... I must remove it because it's function is discharge any overcurrent, in theory and in practice it can work for a while without it.
Thanks