View topic - Need module 11 or modules for WD Pinclite 1.C7

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Switch to mobile style

Need module 11 or modules for WD Pinclite 1.C7

Page 1 of 1

[ 3 posts ]

Previous topic | Next topic

Author

Message

saltwater

Post subject: Need module 11 or modules for WD Pinclite 1.C7

Posted: December 28th, 2014, 8:12

Joined: November 3rd, 2013, 13:04
Posts: 330
Location: Hungary

Hello everyone!
I hope somebody could help me.
I have a PCB burned WD2500AAJS-00M0A0 drive.
With donor PCB i can access to SA, and i read out some modules.
After i regenerated ROM modules and write back to a donor PCB, the drive does not identified.
I can access to SA, but module 11 is corrupt.
Here it is the drive parameters:
WD2500AAJS-00M0A0
ROM FW REV.:1.C7
FW Version:01.03E01
DATE:2008.NOV.20
I need FW modules.
Thank you!

Top

MindMergepk

Post subject: Re: Need module 11 or modules for WD Pinclite 1.C7

Posted: December 28th, 2014, 9:36

Joined: December 8th, 2013, 4:48
Posts: 838
Location: Pakistan

here is the closest FW Version: 01.03E01, ROM FW REV.:000100CS
you can try

good luck

Attachments:

11.zip [144.9 KiB]
Downloaded 233 times

_________________
Data Recovery Pakistan

Top

saltwater

Post subject: Re: Need module 11 or modules for WD Pinclite 1.C7

Posted: December 29th, 2014, 11:58

Joined: November 3rd, 2013, 13:04
Posts: 330
Location: Hungary

Thank you MindMergepk!
I will try this one....
Thanks again

Top

Page 1 of 1

[ 3 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 38 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum