Hi!
It's my first post here, sorry for my english
![Smile :)](./images/smilies/icon_smile.gif)
Seagate ST1000DM003
PN: 1ER162-300
FW: CC43
Board number: 100724095 rev A
The drive is not being detected by Bios. When connected to terminal, HDD allow me to log in to the console, I can switch between levels, but I can't do anything else. Drive doesn't respond to commands like SpinDown, Translator repair, etc:
Code:
Boot 0x40M
Spin Up
Trans.
Spin Up
SpinOK
TCC:001F
SNOOOZZZZZZEEE Retry
EDAC Value = 0000F018E59EDCE4
SNOOOZZZZZZEEE Retry
EDAC Value = 0000F018E59EDCE4
SIM Error 2042 LBA 0000000000090FCA FD FC359028
RW Error 00000080
No HOST FIS-ReadyStatusFlags 0002A1A1
ASCII Diag mode
F3 T>/2
F3 2>Z
F3 2> - here the motor doesn't spin down
Reaction for translator rebuild is the same - no reaction and no anwser from the drive.
Am I missing something? I'm working without shorted "read channel" pins (I think there's no need if I can access the console, I don't even know, which pins should be short). Can this be a bad head or HSA problem? I don't get any LED errors, except the N1 command, wchich returns some (but I don't have any log).