MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Switch to mobile style


Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 
  Previous topic | Next topic 
Author Message
ibcho
 Post subject: Western digital WD10EACS-00ZJB0 Not Reading Anything
PostPosted: October 18th, 2016, 4:35 
Offline

Joined: June 30th, 2008, 5:40
Posts: 64
hello everyone,

I have this WD hard drive. It comes ready position on PC3000 , id and capacity is okay. i can backup all the modules and rom without any problem
however, when i try to clone this drive onto another hard drive it doesnt read any data and keep software resetting and clicking

tried translator regeneration but it wont complete ,
tried another pcb but same behaviour

anyone could give any idea or some one had similar issue

cheers


Attachments:
2.jpg
2.jpg [ 870.68 KiB | Viewed 6560 times ]
1.jpg
1.jpg [ 223.28 KiB | Viewed 6560 times ]
wd-hulk.log [1.41 KiB]
Downloaded 540 times
Top
 Profile  
 
jerovsek
 Post subject: Re: Western digital WD10EACS-00ZJB0 Not Reading Anything
PostPosted: October 18th, 2016, 4:56 
Offline

Joined: August 3rd, 2012, 7:47
Posts: 396
Location: slovenija
did you pull drive from enclousure
could be encryption
Top
 Profile  
 
Mikippp
 Post subject: Re: Western digital WD10EACS-00ZJB0 Not Reading Anything
PostPosted: October 18th, 2016, 5:50 
Offline

Joined: May 30th, 2005, 17:07
Posts: 542
Hi,
Check that all heads are working properly

Mikippp
Top
 Profile  
 
H13
 Post subject: Re: Western digital WD10EACS-00ZJB0 Not Reading Anything
PostPosted: October 18th, 2016, 5:58 
Offline

Joined: December 16th, 2015, 12:37
Posts: 99
Location: GCC
hey .. why u are not making heads map first to saperat the reading from each one ?
Top
 Profile  
 
MindMergepk
 Post subject: Re: Western digital WD10EACS-00ZJB0 Not Reading Anything
PostPosted: October 18th, 2016, 6:25 
Offline
User avatar

Joined: December 8th, 2013, 4:48
Posts: 838
Location: Pakistan
ibcho wrote:
tried translator regeneration but it wont complete ,


it explains that problem is probably with heads, have you test heads ??

_________________
Data Recovery Pakistan
Top
 Profile  
 
day1data
 Post subject: Re: Western digital WD10EACS-00ZJB0 Not Reading Anything
PostPosted: October 18th, 2016, 7:49 
Offline
User avatar

Joined: January 6th, 2015, 2:21
Posts: 186
Location: Germany
Do a heads test in utility.

_________________
Web: https://www.day1data.de
Top
 Profile  
 
Kum Ruzvelt
 Post subject: Re: Western digital WD10EACS-00ZJB0 Not Reading Anything
PostPosted: October 18th, 2016, 10:31 
Offline

Joined: December 17th, 2009, 22:57
Posts: 142
Location: Macedonia
You van edit head map in RAM. Start first with heads 0 or 1, then you can make adjustment and add good heads. Isolate bad one.

_________________
Sistrum Data Recovery
http://www.sistrum.mk/en
Top
 Profile  
 
pcimage
 Post subject: Re: Western digital WD10EACS-00ZJB0 Not Reading Anything
PostPosted: October 18th, 2016, 14:24 
Offline

Joined: November 29th, 2006, 10:08
Posts: 7864
Location: UK
Kum Ruzvelt wrote:
You van edit head map in RAM. Start first with heads 0 or 1, then you can make adjustment and add good heads. Isolate bad one.


Good advice!

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: ccc and 65 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group