MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Switch to mobile style


Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 
  Previous topic | Next topic 
Author Message
jackass25
 Post subject: SMART errors hide....
PostPosted: December 29th, 2016, 14:32 
Offline

Joined: October 15th, 2012, 13:50
Posts: 56
Location: EUROPE
How to hide any SMART errors and pass all commercially available scan tools (like HDSentinel) and show no Pending sector, reallocated sector count etc.. without loose "Power_on_time" and "Total start/stop count" option? I have MRT Pro...

Thank you in advance for answers.................

....with respect..
Top
 Profile  
 
drHDD
 Post subject: Re: SMART errors hide....
PostPosted: December 29th, 2016, 16:08 
Offline

Joined: October 5th, 2015, 18:53
Posts: 488
Location: US
So next time how we will find out that you are cleared SMART?
Top
 Profile  
 
jackass25
 Post subject: Re: SMART errors hide....
PostPosted: December 29th, 2016, 17:20 
Offline

Joined: October 15th, 2012, 13:50
Posts: 56
Location: EUROPE
:roll: No, I need informations.... is possible this operation with mrt pro ?...
Top
 Profile  
 
jackass25
 Post subject: Re: SMART errors hide....
PostPosted: December 30th, 2016, 17:51 
Offline

Joined: October 15th, 2012, 13:50
Posts: 56
Location: EUROPE
Be calm Mr.Spildit, :D I dont want to sell this drives on Ebay or anywhere ....just every time when I start this drives HDsentinel warning me about errors .....I make this transfer from Glist to Plist but when I try clear SMART everything is clear....I don't want clear "Power_on_time" and "Total start/stop count" parameters...
Top
 Profile  
 
jackass25
 Post subject: Re: SMART errors hide....
PostPosted: December 30th, 2016, 19:00 
Offline

Joined: October 15th, 2012, 13:50
Posts: 56
Location: EUROPE
I have a few WD and Hitachi Hdds...So I want to isolate bad sectors and weak sectors forever without delete major parameters from SMART...(sorry for my weak english...).
Top
 Profile  
 
jackass25
 Post subject: Re: SMART errors hide....
PostPosted: December 30th, 2016, 19:14 
Offline

Joined: October 15th, 2012, 13:50
Posts: 56
Location: EUROPE
Yes,i try...but is a never ending story....test cant stop...
Top
 Profile  
 
jackass25
 Post subject: Re: SMART errors hide....
PostPosted: December 30th, 2016, 19:26 
Offline

Joined: October 15th, 2012, 13:50
Posts: 56
Location: EUROPE
If I use WdMarvel could you tell me what steps need for successfully self scan? everytime when i start the scan i have this error "The drive did not raise the flag DRQ
" .... thank you in advance for help..
Top
 Profile  
 
jackass25
 Post subject: Re: SMART errors hide....
PostPosted: December 30th, 2016, 21:06 
Offline

Joined: October 15th, 2012, 13:50
Posts: 56
Location: EUROPE
Ok...P.M. send... I plug 3 drives ,2 to MRT and 1 to WdMarvel.....
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 70 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group