MultiDrive – free backup, clone & wipe disk utility from Atola Technology

All times are UTC - 5 hours [ DST ]


Switch to mobile style


Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Recovery of NAS with LVM "thick" volume
PostPosted: February 1st, 2017, 21:13 
Offline

Joined: February 16th, 2016, 21:07
Posts: 43
Location: Boston, USA
I'm working on a remote recovery of a QNAP where the data is on a LVM thick volume. With the NAS drives connected to a PC running Ubuntu Linux the RAID assembles fine via mdadm and I can see the logical volume but when I try to activate it says...

# vgchange -ay
WARNING: Unrecognised segment type thick
/usr/sbin/thin_check: execvp failed: No such file or directory
Check of pool vg1/tp1 failed (status:2). Manual repair required!
Refusing activation of LV lv1 containing an unrecognised segment.
1 logical volume(s) in volume group "vg1" now active

Researching this it appears that regular Linux does not know about thick segments. And thick provisioning is an add on created by QNAP. So I found the QNAP sources to make a Linux kernel with LVM thick support. But before I reinvent the wheel I thought I would ask if anyone has seen a similar case and may have a pre built kernel to share? Or does anyone know of a work around for recovering LVM thick volumes?

_________________
On-Line Data Recovery Consultant. RAID / NAS / Linux Specialist.
Serving clients worldwide since 2011
FreeDataRecovery.us


Top
 Profile  
 
 Post subject: Re: Recovery of NAS with LVM "thick" volume
PostPosted: February 6th, 2017, 9:35 
Offline

Joined: March 7th, 2009, 12:43
Posts: 1091
Location: Angel Data Recovery
S.Haran wrote:
I'm working on a remote recovery of a QNAP where the data is on a LVM thick volume. With the NAS drives connected to a PC running Ubuntu Linux the RAID assembles fine via mdadm and I can see the logical volume but when I try to activate it says...

# vgchange -ay
WARNING: Unrecognised segment type thick
/usr/sbin/thin_check: execvp failed: No such file or directory
Check of pool vg1/tp1 failed (status:2). Manual repair required!
Refusing activation of LV lv1 containing an unrecognised segment.
1 logical volume(s) in volume group "vg1" now active

Researching this it appears that regular Linux does not know about thick segments. And thick provisioning is an add on created by QNAP. So I found the QNAP sources to make a Linux kernel with LVM thick support. But before I reinvent the wheel I thought I would ask if anyone has seen a similar case and may have a pre built kernel to share? Or does anyone know of a work around for recovering LVM thick volumes?


You should exclude culprit drive from your reconstruction.

_________________
Angel Data Recovery


Top
 Profile  
 
 Post subject: Re: Recovery of NAS with LVM "thick" volume
PostPosted: February 6th, 2017, 11:14 
Offline
User avatar

Joined: April 3rd, 2011, 0:19
Posts: 2003
Location: Providence, RI
Perhaps you can just read out the RAID settings using mdadm and then assemble it in R-Studio.

_________________
Data Medics - Hard Drive, SSD, and RAID Data Recovery Service Company


Top
 Profile  
 
 Post subject: Re: Recovery of NAS with LVM "thick" volume
PostPosted: February 7th, 2017, 13:32 
Offline

Joined: February 16th, 2016, 21:07
Posts: 43
Location: Boston, USA
@Dr-Kiev, The culprit drive was already excluded and the RAID assembles fine in degraded mode.

@data-medics, Thanks. I see R-Studio now supports LVM. But I expect it is Linux standard LVM. I don't have access right now to test it.

_________________
On-Line Data Recovery Consultant. RAID / NAS / Linux Specialist.
Serving clients worldwide since 2011
FreeDataRecovery.us


Top
 Profile  
 
 Post subject: Re: Recovery of NAS with LVM "thick" volume
PostPosted: February 14th, 2017, 7:43 
Offline

Joined: March 7th, 2009, 12:43
Posts: 1091
Location: Angel Data Recovery
UFS , Recovery Explorer Professional
http://www.sysdevlabs.com/product.php?id=rxp6

Quote:
Software changes log:

Version 6.9.3 (dated 19.01.2017):
- Download for Microsoft Windows;
- Download for Linux OS;
- Download for Apple Mac OS X;

What's new in version 6.9.3:
* Added support of LVM2 thin-provisioned volumes;
* Extended support of camera-raw formats by embedded viewer.

_________________
Angel Data Recovery


Top
 Profile  
 
 Post subject: Re: Recovery of NAS with LVM "thick" volume
PostPosted: February 16th, 2017, 12:36 
Offline

Joined: February 16th, 2016, 21:07
Posts: 43
Location: Boston, USA
Thank you DR-Kiev for sharing that. I am not able to test if it also supports thick volumes. But it is nice to see an app that supports thin LVM volumes as I do not know any that do apart from the thin tools available with Linux.

_________________
On-Line Data Recovery Consultant. RAID / NAS / Linux Specialist.
Serving clients worldwide since 2011
FreeDataRecovery.us


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 126 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group