Hello
I'm still testing and breaking down the hard drive to make my hand.
Today I took out an old hard drive that hasn't worked for a long time.
I looked at it and saw that the motor that drives the drives is not running. I tried just without forcing it to turn right or left and impossible.
You would say that it is what kind of failure? and what would be the solution?

Thanks

Translated with www.DeepL.com/Translator (free version)

Those are the cases where a platter swap is the solution.
Or eventually replace the spindle.

_________________
http://www.pclab.com.pt facebook.com/PCLAB.A.T
ACELab partner

Thank you for your response.
Are there Tutoials to see this?

Yes. Here it is https://www.youtube.com/watch?v=rWR-bSJeLX8

_________________
Angel Data Recovery

Probably does require platter(s) transfer, but this is 100% NOT a DIY case.

Depending on actual model, this can be a moderate to extremely difficult case even for most pros!

Proper diagnosis is required.

_________________
PC Image Data Recovery
http://www.pcimage.co.uk

New!! HDD-PCB.COM for all your PCB and donor HDD requirements!

Thank you. That's nice.

Deleted
Wrong message

_________________
Sexy Womans from your town