MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Switch to mobile style


Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 
  Previous topic | Next topic 
Author Message
zizsobhi2025
 Post subject: Request : BoardView for WD PCB 2060-800041-003 REV P1
PostPosted: June 10th, 2025, 12:57 
Offline

Joined: June 10th, 2025, 12:42
Posts: 1
Location: Egypt
Hello everyone,

I'm looking for a BoardView or schematic file for a Western Digital PCB with the following part number:

2060-800041-003 REV P1

The board is from a WD USB external hard drive, and I'm trying to either repair it or convert it to SATA to recover data. If anyone has the .brd, .bv, or any related diagram, I would greatly appreciate your help.

Thanks in advance!
Top
 Profile  
 
SWM
 Post subject: Re: Request : BoardView for WD PCB 2060-800041-003 REV P1
PostPosted: June 10th, 2025, 16:09 
Offline

Joined: February 22nd, 2023, 13:49
Posts: 327
Location: Eastern Europe
Quote:
I'm looking for a BoardView or schematic file for a Western Digital PCB with the following part number:

:lol: If you find it, share it. You can send it to me in PM.
https://forum.hddguru.com/viewtopic.php?f=1&t=42203
https://www.google.com/search?q=PCB+206 ... 03+to+SATA


Last edited by SWM on June 10th, 2025, 16:22, edited 1 time in total.

Top
 Profile  
 
fzabkar
 Post subject: Re: Request : BoardView for WD PCB 2060-800041-003 REV P1
PostPosted: June 10th, 2025, 16:09 
Offline
User avatar

Joined: September 8th, 2009, 18:21
Posts: 16955
Location: Australia
If the symptom is no power, the usual cause is dry solder joints at the zero-ohm resistor adjacent to the USB connector. Reflow the solder and you should be OK.

_________________
A backup a day keeps DR away.
Top
 Profile  
 
instantmash
 Post subject: Re: Request : BoardView for WD PCB 2060-800041-003 REV P1
PostPosted: July 10th, 2025, 10:47 
Offline

Joined: July 10th, 2025, 10:00
Posts: 1
Location: Canada
fzabkar wrote:
If the symptom is no power, the usual cause is dry solder joints at the zero-ohm resistor adjacent to the USB connector. Reflow the solder and you should be OK.


I just made an account to say thanks! I suspected a power issue but finally took a second look with my new microscope and sure enough, that's the issue! Reflowed the solder and it works, no board swap needed. :D

Attachment:
IMG_20250708_171054_687 small.png
IMG_20250708_171054_687 small.png [ 383.28 KiB | Viewed 488 times ]


Top
 Profile  
 
Pcokay
 Post subject: Re: Request : BoardView for WD PCB 2060-800041-003 REV P1
PostPosted: November 25th, 2025, 17:33 
Offline

Joined: November 25th, 2025, 17:29
Posts: 2
Location: France
Hello,

Many thanks, good catch, same problem here ! 8)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 5 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: Google [Bot] and 34 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group