View topic - Maxtor 200 Go detected as 2 To

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Switch to mobile style

Maxtor 200 Go detected as 2 To

Page 1 of 1

[ 2 posts ]

Previous topic | Next topic

Author

Message

nikos56

Post subject: Maxtor 200 Go detected as 2 To

Posted: June 29th, 2007, 1:48

Joined: June 29th, 2007, 1:39
Posts: 1

Hi !

I've got this hdd :
Maxtor DiamondMax 10 200GB SATA150 8MB
SN : L40CQ9GH
TLA : 6L200M004641A

After a crash under windows xp I reboot my PC.
But my hdd was not detected by bios.
I test it with other pc and impossible to detect it.
I test with an usb adaptator and the hdd is detected as a Maxtor 2 To under windows xp.
I change the pcb but the problem is the same.

How I can recover my data.

Thanks for yours answers.

Nico

PS : Scuse for my bad English I'm french

Top

beto

Post subject: Hy

Posted: June 29th, 2007, 11:57

Joined: October 21st, 2005, 0:45
Posts: 1517
Location: Mexico

U need to check ATA Registers, if show DRDY DSC u need to send a command to access sectors if show ERR AMNF surely had a SA corruption on firmware modules, then u need special tools wich manage the vendor tracks, and knowledgment about SA zones or send to a data recovery comapany

Best Regards

Alberto

Top

Page 1 of 1

[ 2 posts ]

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 66 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum