MultiDrive – free backup, clone & wipe disk utility from Atola Technology

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Switch to mobile style


Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 
  Previous topic | Next topic 
Author Message
zed
 Post subject: ATA-Password Removal - Anybody know Probe location?
PostPosted: October 22nd, 2007, 2:28 
Offline

Joined: August 25th, 2007, 1:24
Posts: 297
Location: Western Australia, Australia
Hi All,

I have a PC-3000 PCI and a ATA-Password Protected Hard Disk. I need to remove the ATA-Password but the PC-3000 Manual i have does not show the probe location on the PCB.

Does anybody have a photo of the probe location on a PCB, is it in the new PC-3000 manuel?

Does anybody know where the probe should be placed in order for the PC-3000 to reset/disable the ata password?

Thanks in advance. Below is a photo of the PCB.


Attachments:
Scan10083.JPG
Scan10083.JPG [ 71.58 KiB | Viewed 4866 times ]
Top
 Profile  
 
mr_spokk
 Post subject: Re: ATA-Password Removal - Anybody know Probe location?
PostPosted: October 22nd, 2007, 12:05 
Offline

Joined: May 21st, 2007, 16:10
Posts: 1592
Location: Gothenburg/ Sweden
Hi Zed,
What model is it?

Regards

Bosse

_________________
Rescue IT Datarecovery service Sweden
Rescue IT Dataräddning Göteborg AB
http://www.rescue-it.se
Top
 Profile  
 
zed
 Post subject: Re: ATA-Password Removal - Anybody know Probe location?
PostPosted: October 22nd, 2007, 18:23 
Offline

Joined: August 25th, 2007, 1:24
Posts: 297
Location: Western Australia, Australia
IBM DJCA-220
Top
 Profile  
 
gyrfalcon
 Post subject: Re: ATA-Password Removal - Anybody know Probe location?
PostPosted: October 23rd, 2007, 14:23 
Offline

Joined: October 23rd, 2007, 14:11
Posts: 12
Can't you just hook up to the 4 pins next to the IDE ones for PC3000 and erase it that way?
Top
 Profile  
 
zed
 Post subject: Re: ATA-Password Removal - Anybody know Probe location?
PostPosted: October 24th, 2007, 19:56 
Offline

Joined: August 25th, 2007, 1:24
Posts: 297
Location: Western Australia, Australia
Does that really work? Do you have a photo of this 'hooking up' ?
Top
 Profile  
 
zed
 Post subject: Re: ATA-Password Removal - Anybody know Probe location?
PostPosted: November 10th, 2007, 4:29 
Offline

Joined: August 25th, 2007, 1:24
Posts: 297
Location: Western Australia, Australia
Does anybody have any suggestions on how to remove the ata-password from this disk or the location where the pc-3000 single pin probe should go on this pcb?

aff repair station and mhdd cannot erase this password from this model disk. The probe location ace provided does not seem accurate either. :(

Any suggestions? I need to remove the unknown ata password, it's in security mode high, maximum. I need to get access to the data ASAP.

Thanks in advance for any help.
Top
 Profile  
 
Starling
 Post subject: Re: ATA-Password Removal - Anybody know Probe location?
PostPosted: November 12th, 2007, 13:36 
Offline

Joined: January 29th, 2005, 22:58
Posts: 637
Location: Canada
hot swap.
Top
 Profile  
 
Starling
 Post subject: Re: ATA-Password Removal - Anybody know Probe location?
PostPosted: November 12th, 2007, 13:38 
Offline

Joined: January 29th, 2005, 22:58
Posts: 637
Location: Canada
zed wrote:
IBM DJCA-220

You mean DJSA-220?
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 

Main » Forums home » Conventional hard drives

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: shamimdhali and 60 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Switch to mobile style
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group