August 17th, 2009, 6:25
August 17th, 2009, 6:51
Ombladon wrote:Nirvanowiec wrote:unlock WD (WDC,MARVEL,ROYL) ->
http://ng.uber.lt/#comp.hardware/415673 ... hdd-pamiro
http://yura.projektas.lt/files/wd/zu.zip
zu gives me a error:ERR:51E0EB14000304 CMD:0000000000E0EC
NO DRQ!
August 17th, 2009, 8:16
August 17th, 2009, 16:40
August 29th, 2009, 4:54
Nirvanowiec wrote:Patient: I drank a Valium zymosis he does not help. Doctor: What's the problem then? Patient: Yes diarrhea for 2 days
September 12th, 2009, 12:55
September 15th, 2009, 0:54
September 24th, 2009, 14:33
September 25th, 2009, 0:04
October 1st, 2009, 18:06
October 16th, 2009, 2:26
October 17th, 2009, 4:57
Nirvanowiec wrote:Look at EC command - even hdd passport was not read. Software cannot work in this case, as it cannot make you a sandwitch.
http://yura.projektas.lt/files/wd/royl_mhdd.html - first movie for disbelievers - works 100%.
November 17th, 2009, 17:02
November 17th, 2009, 17:37
M0RBI0US wrote:hi i was stuck with the same problem which i solve on a WDC2500bevt
just a quick list of master pwd i found on my travels
WDCWDCWDCWDCWDCWDCWDCWDCWDCWDCW <----THIS ONE WORKED FOR ME
WDCWDCWDCWDCWDCWDCWDCWDCWDCWDCWD
&'()*.WDCWDCWDCWDCWDCWDCWDCWDCWDCWDCWD
h2oinsyde <-----for acer drive(but not mine)
if none of the above work then the fun begins
first download MHDD boot disk (google for it)
copy the unzipped files i put up on to a usb stick and plug in
remove all drives except locked one
boot the cd and press F5 (safe mode)
type 'c:' to get to the contents of usb drive
then type MHDD to run the program on the usb not the cd as that is wrong version
in MHDD (select drive this might take a little bit of getting use to!)
run the script by typing ".dump" or ".dump2" (two different scripts)
the script will run and return "DONE"
read the 22.bin file if DUMP script run ok with a hex editor
and 42.bin if DUMP2 script run ok with a hex editor
also read all other posts for more info
hope this helps
and a great big thanks too all who posted and helped me save 8 months worth of HNC elec engineering work thanks!
Nirvanowiec, a big xtra thanx for the script i used....
December 3rd, 2009, 15:03
Luda wrote:M0RBI0US wrote:hi i was stuck with the same problem which i solve on a WDC2500bevt
just a quick list of master pwd i found on my travels
WDCWDCWDCWDCWDCWDCWDCWDCWDCWDCW <----THIS ONE WORKED FOR ME
WDCWDCWDCWDCWDCWDCWDCWDCWDCWDCWD
&'()*.WDCWDCWDCWDCWDCWDCWDCWDCWDCWDCWD
h2oinsyde <-----for acer drive(but not mine)
if none of the above work then the fun begins
first download MHDD boot disk (google for it)
copy the unzipped files i put up on to a usb stick and plug in
remove all drives except locked one
boot the cd and press F5 (safe mode)
type 'c:' to get to the contents of usb drive
then type MHDD to run the program on the usb not the cd as that is wrong version
in MHDD (select drive this might take a little bit of getting use to!)
run the script by typing ".dump" or ".dump2" (two different scripts)
the script will run and return "DONE"
read the 22.bin file if DUMP script run ok with a hex editor
and 42.bin if DUMP2 script run ok with a hex editor
also read all other posts for more info
hope this helps
and a great big thanks too all who posted and helped me save 8 months worth of HNC elec engineering work thanks!
Nirvanowiec, a big xtra thanx for the script i used....
I need help, if I do this, in MHDD I have errors: ERROR: No DRQ
And there are no new bin files on flash drive
Where will be problem?
There is screen from MHDD:
Thanks
[PRE]
51 ERR INDX CORR DREQ DRSC WRFT DRDY BUSY AMNF T0NF ABRT IDNF UNCR BBK 04
[ Drive parameters - PRESS F2 to DETECT ] [ Current position ]
LINE 5: REGS = $D6 $01 $BE $4F $C2 $A0 $B0
LINE 6: WAITNBSY
LINE 7: CHECKDRQ
LINE 8: SECTORSFROM = CS.BIN
LINE 9: REGS = $D5 $01 $BF $4F $C2 $A0 $B0
LINE 10: WAITNBSY
LINE 11: CHECKDRQ
ERROR: No DRQ
MHDD>.dump2
MHDD ATA/SCSI TERMINAL v2.1
Script: DUMP2
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
LINE 1: RESET
LINE 2: WAITNBSY
LINE 3: REGS = $57 $44 $43 $00 $00 $A0 $8A
LINE 4: WAITNBSY
LINE 5: REGS = $00 $02 $00 $00 $0F $E0 $21
LINE 6: WAITNBSY
LINE 7: CHECKDRQ
ERROR: No DRQ
| Exit : <ALT+X> | 22:35:56
[/PRE]
December 18th, 2009, 17:16
December 18th, 2009, 17:58
December 23rd, 2009, 8:48
December 23rd, 2009, 10:15
hdd07 wrote:Hi Luda,
Have you got the 42.bin?
Have you run all the 3 dump scripts?
Have you tried the Zu if you just want to remove the password?
Good Luck.
Luda wrote:M0RBI0US wrote:hi i was stuck with the same problem which i solve on a WDC2500bevt
just a quick list of master pwd i found on my travels
WDCWDCWDCWDCWDCWDCWDCWDCWDCWDCW <----THIS ONE WORKED FOR ME
WDCWDCWDCWDCWDCWDCWDCWDCWDCWDCWD
&'()*.WDCWDCWDCWDCWDCWDCWDCWDCWDCWDCWD
h2oinsyde <-----for acer drive(but not mine)
if none of the above work then the fun begins
first download MHDD boot disk (google for it)
copy the unzipped files i put up on to a usb stick and plug in
remove all drives except locked one
boot the cd and press F5 (safe mode)
type 'c:' to get to the contents of usb drive
then type MHDD to run the program on the usb not the cd as that is wrong version
in MHDD (select drive this might take a little bit of getting use to!)
run the script by typing ".dump" or ".dump2" (two different scripts)
the script will run and return "DONE"
read the 22.bin file if DUMP script run ok with a hex editor
and 42.bin if DUMP2 script run ok with a hex editor
also read all other posts for more info
hope this helps
and a great big thanks too all who posted and helped me save 8 months worth of HNC elec engineering work thanks!
Nirvanowiec, a big xtra thanx for the script i used....
I need help, if I do this, in MHDD I have errors: ERROR: No DRQ
And there are no new bin files on flash drive
Where will be problem?
There is screen from MHDD:
Thanks
[PRE]
51 ERR INDX CORR DREQ DRSC WRFT DRDY BUSY AMNF T0NF ABRT IDNF UNCR BBK 04
[ Drive parameters - PRESS F2 to DETECT ] [ Current position ]
LINE 5: REGS = $D6 $01 $BE $4F $C2 $A0 $B0
LINE 6: WAITNBSY
LINE 7: CHECKDRQ
LINE 8: SECTORSFROM = CS.BIN
LINE 9: REGS = $D5 $01 $BF $4F $C2 $A0 $B0
LINE 10: WAITNBSY
LINE 11: CHECKDRQ
ERROR: No DRQ
MHDD>.dump2
MHDD ATA/SCSI TERMINAL v2.1
Script: DUMP2
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
LINE 1: RESET
LINE 2: WAITNBSY
LINE 3: REGS = $57 $44 $43 $00 $00 $A0 $8A
LINE 4: WAITNBSY
LINE 5: REGS = $00 $02 $00 $00 $0F $E0 $21
LINE 6: WAITNBSY
LINE 7: CHECKDRQ
ERROR: No DRQ
| Exit : <ALT+X> | 22:35:56
[/PRE]
December 23rd, 2009, 10:23
M0RBI0US wrote:when MHDD runs the script it will not make a new .bin file it will output to the 22 or 42 bin files so that the script does not have to create the output file (if it can.?) these then will contain the dump from the drive rom...
cs.bin contains the regs(registers) to be output by the script where they came from beats me....?and will be different for each make and model of drives
thanxs again to all in this forum with that kind of info..xXx
dump48 script i believe now to be completly useless as that was written for if the drive was in 48 bit mode i think but was never tested????
Powered by phpBB © phpBB Group.