Terminal log

[sempre]

Hi to all!

Error is hdd ST9160821AS
Look:

Reset
4096k x 16 DRAM
VENUS - 1_Disk M-37 12-01-06_14:56

Buzz HM SFI
!
ERR Read Boot Adapts


Thanks advanced!!

[pepe]

might be weak heads (most probably) or damaged adaptives...

pepe

[rameez]

I vote for heads .

[networkpc3000]

hello,
have you try to swap the PCB?

[pepe]

yeah, one more chance: pcb is not the native one.

pepe

[rameez]

I dont think it could be pcb issue if it was the output would have been about APP code .

[pepe]

If somebody messed up the PCBs and Sempre received it with non native PCB, the drive can seek the SA in a different position, so it cannot read boot adapts from there either...

pepe

[sempre]

hello,
have you try to swap the PCB?

For exchange of pcb which details must be identical? (FW, MODEL,)

[beto]

Check the numbers on pcb, and tried to find similar PCB Matching microcontroller and read channel, did u check if PCB its from patient HDA Sempre?

[sempre]

Check the numbers on pcb, and tried to find similar PCB Matching microcontroller and read channel, did u check if PCB its from patient HDA Sempre?

Thanks my friend!!

I verify and post result in forum!!

[sempre]

HEADS GOOD!

[sempre]

Hi to all!

in pci ver 2.21 and 2.27 not and compatible with model ? (ST9160821AS VENUS)

[sempre]

Hi to all!

in pci ver 2.21 and 2.27 not and compatible with model ? (ST9160821AS VENUS)

It has some possibility to use a utilitarian one of one another model to read the FW?