Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
November 27th, 2008, 2:23
hi,
i ran the most scan and read bad sectors on my IDE Barracuda seagate 160GB harddisk. I didn't get any errors. But sometimes why harddisk doesn't get detected in BIOS. When i bootup with floppy it still doesn't show up in the device menu.
Now i power down the computer 2 or 3 times and sometimes give a very small tap on the side of the harddisk (this i got from experience or a very small shake) and it would boot up fine showing in BIOS and in mhdd.
Can you suggest the source of this problem ? This has been happening over the last 7 -8 months around 3 - 4times. I never hard any other problems with this harddisk.
I aslo tried hdat2. I still get the same error.
Thanks
terry
November 27th, 2008, 3:11
hello,
i have experience that some time it's the PCB osculation have problem. you can check it. some time head also. you backup your data as well.
November 27th, 2008, 9:00
The disk is dead and it's getting tired coming back from the grave.
Get a new disk immediately. Do not attempt to salvage a $60 disk.
November 27th, 2008, 15:12
networkpc3000 ,
What does osculation mean?
Powered by phpBB © phpBB Group.