Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
July 21st, 2003, 22:11
Hi! I think mhdd is very very good software, but I don't know how to use it repair my harddisk. These harddisk have some bad track, When I use mhdd F4 function key to scan my harddisk, it's appear "!" ,"?" and "x" etc. Who can help me!
My English is very poor!
Thinaks a lot!
July 28th, 2003, 11:38
Hi, well you can start with the erase command or aerase and then you can do the scan, remember this can demage the files on the hdd, after you perform this function and you goes to scan; if you see !!!!!! then you may have an eletronic problem and the most commun is PCB demage.
OBS: In the future it will be better for you; when you want some information to be more specific, like what is the hard disk and how the problem start and all the infos that you can be able to say.
August 5th, 2003, 0:26
Hi jmuanes!
I'm sure many of these hardisk PCB is good, only some of them have a few bad track sectors. I have already use command of arease, Erase waits and scan, but these bad track sector is still on! Please help me!
Powered by phpBB © phpBB Group.