Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

6E030L0 fw need

December 17th, 2008, 12:55

I need the fw for the drive.

6E030L0510613 AAA
NAR61590
E18XXXXX

Re: 6E030L0 fw need

December 17th, 2008, 13:07

Look HDDGURU FILES?
:mrgreen:

Re: 6E030L0 fw need

December 17th, 2008, 14:21

Not exist there. i need for sd.
ram, boot, mods.

Re: 6E030L0 fw need

December 17th, 2008, 17:12

I have a bunch of other 6E030L0 NAR61590 that are E1XXXXXX but no E18XXXXX. Let me know if you would like one of those.

Re: 6E030L0 fw need

December 17th, 2008, 17:52

You can use any size as long as you have same firmware.
There is a lot of them on HDDGURU FILES

Re: 6E030L0 fw need

December 18th, 2008, 4:30

Thanks for reply.
I used E15.

Re: 6E030L0 fw need

December 18th, 2008, 5:17

Based on my experience, the 3rd number in the SN doesn't matter.
All the NAR61590 numbered fw are the same, only the zone record table differs if the drive less than 41GB.
(And the adaptive parts of course)

You can try any ...590s with E1....

Good luck! ;)

Janos

Re: 6E030L0 fw need

December 18th, 2008, 7:31

Never realised there was any importance in the serial number. Never had any problems repairing these without matching any of the serial.

Re: 6E030L0 fw need

December 18th, 2008, 9:09

Shahij, any 61590 of E1 will work. Need data or repair drive only?
Post a reply