PCB BAD ST9160821AS

[sempre]

Hi to all!!

PATIENT IS ST9160821AS FW:3.BHE PN: 9S1134-022 SITE: WU (PCB 100398689 REV C)
DONOR IS ST9160821AS FW:3.BHE PN: 9S1134-022 SITE: WU (PCB 100398689 REV C)
pcb bad. I changed pcb with one good pcb.

RECOGNIZED HDD AND FOR THE MHDD, WHEN READING MEDIA (F2-SCAN) READ WITH SOME BADS BLOCKS

NOT READ (DE PCI) 2.21
IMG FOR COPYRDMA (VERY SLOW AND AFTER THE ERRORS (BUSY)

HELP-ME!!

HAPPY CHRISTMAS!!!

[sempre]

CorrectWriteSReset
4096k x 16 DRAM
VENUS - 1_Disk M-37 12-01-06_14:56

Buzz HM SFI
!
(P)SATA Reset
(H)SATA Reset
AT Er 00 Nwt Er 37 RdWr 13cef.03.00e0
ATA St 50 Er 01 Op 00 0,0000/0/00,00 01 00
Niwot: 97b29fb7 c0 97b29fb7.1.bda 0000 007f 0000 e097
DiskAccess ReadSector EC=43 at 013cef.03.00e0

CE Log ErrCode=37 LBA=10aba0f0 Type=5 Add To Pending 10aba0f0
AT Er 00 Nwt Er 37 RdWr 13cef.03.00e1
ATA St 50 Er 01 Op 00 0,0000/0/00,00 01 00
Niwot: 9fb79fb7 c0 9fb79fb7.1.bda 0000 007f 0000 e097
DiskAccess ReadSector EC=43 at 013cef.03.00e1

CE Log ErrCode=37 LBA=10aba0f1 Type=5 Add To Pending 10aba0f1
AT Er 00 Nwt Er 37 RdWr 13cef.03.00e2
ATA St 50 Er 01 Op 00 0,0000/0/00,00 01 00
Niwot: 9fb79fb7 c0 9fb79fb7.1.bda 0000 007f 0000 e097
DiskAccess ReadSector EC=43 at 013cef.03.00e2

CE Log ErrCode=37 LBA=10aba0f2 Type=5 Add To Pending 10aba0f2

CE Log ErrCode=37 LBA=10aba010 Type=6aAT Er 00 Nwt Er 37 RdWr 13cf0.03.0080
ATA St 50 Er 01 Op 00 0,0000/0/00,00 01 00
Niwot: 97b29fb7 c0 97b29fb7.1.bda 0000 007f 0000 006a
DiskAccess ReadSector EC=43 at 013cf0.03.0080

CE Log ErrCode=37 LBA=10aba330 Type=5 Add To Pending 10aba330
AT Er 00 Nwt Er 37 RdWr 13cf0.03.0081
ATA St 50 Er 01 Op 00 0,0000/0/00,00 01 00
Niwot: 9fb79fb7 c0 9fb79fb7.1.bda 0000 007f 0000 006a
DiskAccess ReadSector EC=43 at 013cf0.03.0081

CE Log ErrCode=37 LBA=10aba331 Type=5 Add To Pending 10aba331

CorrectWriteStart
AT Er 00 Nwt Er 22 RdWr 13cf0.03.0083
ATA St 50 Er 01 Op 00 0,0000/0/00,00 01 00
Niwot: 10aba332 14 10aba332.0.000 021e 1bdc 021e 0000

CE Log ErrCode=37 LBA=10aba2b0 Type=6aAT Er 00 Nwt Er 37 RdWr 13cf1.03.0020
ATA St 50 Er 01 Op 00 0,0000/0/00,00 01 00
Niwot: 97b29fb7 c0 97b29fb7.1.bda 0000 007f 0000 006a
DiskAccess ReadSector EC=43 at 013cf1.03.0020

CE Log ErrCode=37 LBA=10aba570 Type=5 Add To Pending 10aba570

CorrectWriteStart
AT Er 00 Nwt Er 22 RdWr 13cf1.03.001c
ATA St 50 Er 01 Op 00 0,0000/0/00,00 01 00
Niwot: 10aba550 14 10aba550.0.000 0020 1bdc 0020 0000

CorrectWriteStart
AT Er 00 Nwt Er 22 RdWr 13cf1.03.001c
ATA St 50 Er 01 Op 00 0,0000/0/00,00 01 00
Niwot: 10aba56c 14 10aba56c

[sempre]

Hi to all!

With mhdd scan these lbas and has only some bads, already if I try to make clone saw tool not windows it starts very slow and after the errors (busy)…

head?
media?
preamp?

Attachments

[Odiferous]

Sempre,

Have you tried a reverse clone?

You may get a good result.


Duncan

[beto]

Hello sempre i got similar problem like u check on PM

Regards and Merry Christmas & Happy New year to all hddguru´s

[sempre]

Thanks replys!!

in special to the friend beto!

[sempre]

Hi to all!!

PATIENT IS ST9160821AS FW:3.BHE PN: 9S1134-022 SITE: WU (PCB 100398689 REV C)
DONOR IS ST9160821AS FW:3.BHE PN: 9S1134-022 SITE: WU (PCB 100398689 REV C)
pcb bad. I changed pcb with one good pcb.

RECOGNIZED HDD AND FOR THE MHDD, WHEN READING MEDIA (F2-SCAN) READ WITH SOME BADS BLOCKS

NOT READ (DE PCI) 2.21
IMG FOR COPYRDMA (VERY SLOW AND AFTER THE ERRORS (BUSY)

HELP-ME!!

HAPPY CHRISTMAS!!!

??

Attachments

[Samo]

…
head?
media?
preamp?...

Firnware issue, the drive "do not know" how to manage bads. IMHO
I think it is solved in UDMA.

[hddguy]

Hello sempre i got similar problem like u check on PM

Regards and Merry Christmas & Happy New year to all hddguru´s

just curious, but what was this solution?

Happy new year to you too

[HDD Spaz]

Im curious too. got a same sort of problem. Will post log later.

[sempre]

Hi to all!!!

I after continue with this problem exchange of pcb I begin, it he is ready and it recognizes and soon after is busy, some help?

[Samo]

Modification of App Code or Intf Sys should solve the pending problem

[ccc]

Modification of App Code or Intf Sys should solve the pending problem

Hmmmm...Modification of APP code seems risky but modification of Vendor is not a problem....but HOW to modify Vendor info in order to stop the pending problem?

[sempre]

Modification of App Code or Intf Sys should solve the pending problem

Hi Samo!

Thanks for reply!

How I make?

[sempre]

Please,
Look log commands terminal.

Help?

Attachments

Commands terminal.rar

(4.44 KiB) Downloaded 507 times