SAMSUNG HM120JC

[zebong]

Hello,

Have a Samsung case that the head where stuck in the platte, when i remove it very slow to the park zone, and turn on the disk, i get the ID DRD/DSC, and i could start copy some sectors green with DE.

Afther a while, it start to give error.
i Stop the disk them see the terminal and appear this:

IndS=+00005
Spn OK
H: +00000
Load
UF: 1st Gray err
H: +00001
Load
UF: 1st Gray err
H: +00002
Load
UF: 1st Gray err
H: +00003
Load
UF: 1st Gray err
Unload 0002
H: +00000
Load
UF: 1st Gray err
Unload 0002
H: +00001
Load
UF: 1st Gray err
Unload 0002
H: +00002
Load
SK C: 000080AF
C: 000001F4 H: +00000
SR : +00000
UF: 1st Sk err
H: +00001
SK C: 000012D9
AP_EST
C: 000001F4 H: +00000
SR : +00001
UF: 1st Sk err
H: +00001
SK C: 000003E1
SR : +00002
Unload 0001
H: +00000
Load
UF: 1st Gray err
H: +00001
Load
UF: 1st Gray err
H: +00002
Load
UF: 1st Gray err
H: +00003
Load
UF: 1st Gray err
Unload 0002
H: +00000
Load
UF: 1st Gray err
Unload 0002
H: +00001
Load
UF: 1st Gray err
Unload 0002
H: +00002
Load
SK C: 00008731
AP_EST
C: 000001F4 H: +00000
SR : +00003
UF: 1st Sk err
H: +00001
SK C: 000007C7

LED 13
LED 13
.
.
.

In the manual says:
0x13 - Head Unlatch error

It looks like head problem, the question is if i change heads will they work ok?


Thanks
ZeBong

[beto]

On first i will tried to get the most data using all settings and hardware control to tried to gain access to that sectors, even with u tools u could specify the data "clusters" wich u need and adapt to that heads to got sectors from that MFT structure zone

Regards