heads compatible? ST

[sempre]

Hi gurus!
PATIENT HD 80GB
DONOR HD 120GB

LOOK PHOTO...

Attachments

[beto]

Hello sempre donnor its 120gb,and u patient 80Gb (2Heads), the head map will be different, check that 80GB i had check that´s models has some tendence to head crash

[zebong]

Sempre, have you change heads for that model, can you post the results.

[sempre]

Sempre, have you change heads for that model, can you post the results.

Ok!

[sempre]

Hello sempre donnor its 120gb,and u patient 80Gb (2Heads), the head map will be different, check that 80GB i had check that´s models has some tendence to head crash

Thanks for reply my friend!
check pm

[pcimage]

There will be a head hanging free, but it should work fine.

[cryoborgofthevenus]

Yep need delay time to initiate at first time when using DE

[sempre]

Yes, heads compatibles!!!

DE PCI it read the data, to put I am with problems to read the folder my documents….

Help?

[sempre]

Hi

When making the exchange of heads I perceived superficial risks in platter side 1 next to the center to the platter. Ready HD I started date recovery and after one twenty minutes, clicking started… now sees log of the terminal

4096k x 16 buffer detected
PUMA - 1_Disk 0.07 09-26-04 14:00

Buzz - Interface task reset
4096k x 16 buffer detected
PUMA - 1_Disk 0.07 09-26-04 14:00
Head Mask FFFF - Switch to full int.
Spin Ready
3.42 09-26-04 14:03
(P)(H)SATA Reset
AutoRd Err 43 at ffffffff.00.0002
$Switch to full int.
AM Reacquired
AutoRd Err 43 at ffffffff.01.0002

12
Initializing SMART Sectors$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
NIWOT TIME OUT
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
NIWOT TIME OUT
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
NIWOT TIME OUT
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
NIWOT TIME OUT
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
NIWOT TIME OUT
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
NIWOT TIME OUT
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
NIWOT TIME OUT
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
NIWOT TIME OUT
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
NIWOT TIME OUT
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
NIWOT TIME OUT
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired

[zebong]

I think that heads are gone.

Have you try on / off and wait some time.

[sempre]

I think that heads are gone.

Have you try on / off and wait some time.

I waited and I bound today continues the same with log in the terminal…

possible e through some command in the terminal to decide this again or alone changing heads?