ST3320820AS - 320GB SATA - droped in a box

[zebong]

Hi again,

Disk was droped from a BOX case, spindle stuck.

Swap the plattes, to other chassis, but still having a some vibration

What can be wrong here, the platte can be damadge ?

Code:

Reset
4096k x 16 DRAM
GALAXY - 1_Disk    S-6D   09-22-06_15:48
HM SFI
!
$HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM SFI
!
(P)SATA Reset
DiskAccess ReadSector EC=47 at ffffffff.00.0002

Read Ver Retrys
DiskAccess ReadSector EC=43 at ffffffff.00.0002

Read Ver Retrys
$HM HM HM HM HM HM HM HM HM Failed sys sect. write! Nwt Er 11 RdWr 15b28.01.0002
HM SFI
!
$HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM SFI
!
$$HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM HM SFI
!
Unable To Load Overlay 01|000A
$$$HM HM HM HM HM

Thanks
ZeBong

[harddrivespecialist]

Disallignment of platters could cause vibration.

[pcimage]

Either the platters are bent or you've not applied equal torque to the six platter screws.

[prodata]

the next serious problem is this

Unable To Load Overlay 01|000A