Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
April 22nd, 2009, 9:59
looks a fine candidate to me but would like your esteemed opinions. thanks.
- Attachments
-

-

April 22nd, 2009, 10:08
Hy this WD´s are hard to find donnor´s some years ago i got similar case, donnor was same model, at that time, check " 3 letters" DCM now im know´s DCM doesnt matter, and no works foruntely, at that time, the hdd not knocks, and reach´s readiness only the head test show me error at second head, but after work with the patient was possible to get data , because the head swap, not works, endless knocking, i will suggest for this case get a donnor same model but closest date and tried
Regards
April 22nd, 2009, 10:16
thanks Beto. You think my match is not close enough?
Yes disk had click of death, client knocked over while running.
Any closer donors out there?
April 22nd, 2009, 10:53
I have couple of those.
April 22nd, 2009, 11:12
Absolutely incompatible donor for Head Swap.
You need:
1. wd800jd - xxMSxx same with patient;
2. Same head maps
3. Malaysia.
I would never send my broken HDD to such 'pros'...
April 22nd, 2009, 11:47
Match the Dell P/N DC077 for best possible match.
April 22nd, 2009, 11:56
At some models of wd´s even no works if u did head swap using fully same model, same head map , same country, and even same DCM , maybe need´s another thing´s
April 22nd, 2009, 12:00
i have PM'ed you but know what you mean: alignment.
April 22nd, 2009, 12:59
I would use this one for donor
It looks compatible to me
April 22nd, 2009, 22:35
MS Vs LS still the same class.....
give it a test you will know... it is simple.......
April 22nd, 2009, 22:42
I personally would have thought that this is not a good match. But Doomer has me confused. Would you be able to elaborate on this. Why so many different answers???
April 23rd, 2009, 9:05
if the head map , position too its the same, maybe doomer could " so tune " the heads to match on this im think that´s what doomer tried to told us
April 23rd, 2009, 9:14
LSA and MSA are both Unicorns. They use same hardware. Heads map supposed to be the same - 2 heads H0 and H1
You may need some tricks to make the drive work after transplant but this is usual for WDs
April 23rd, 2009, 9:18
Ahhh...

i see, thanks for clarifying this for me.
April 23rd, 2009, 9:22
My magic crystal ball works
April 23rd, 2009, 9:52
thanks doomer and beto!
April 23rd, 2009, 12:22
Doomer wrote:LSA and MSA are both Unicorns. They use same hardware. Heads map supposed to be the same - 2 heads H0 and H1
You may need some tricks to make the drive work after transplant but this is usual for WDs
These tricks you speak of....Manually jigging head alignment or altering adaptives for head alignment?
Powered by phpBB © phpBB Group.