Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
April 29th, 2009, 5:28
Have a 2,5" Fujitsu MHW2120BH here since yesterday - looks to be dead pcb.
As I have that drive the first time:
- what to look for (matching codes) to get a fitting pcb?
- what to take care of?
thks for advice
April 29th, 2009, 5:37
Can it not be repaired ?
April 29th, 2009, 7:42
scratchy wrote:Can it not be repaired ?
there is no visible damage on the pcb
- i was told by customer it could be a shortage ...
drive looks fine outside, pcb looks ok on both sides
+++
April 29th, 2009, 11:43
Check fuses, etc with DMM for continuity.
TVS check resistance (although there are no TVS on these drives to my memory, some seagate 2.5 have TVS)
Powered by phpBB © phpBB Group.