Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

Help with ST340014A please ...

May 25th, 2009, 15:42

Could some please provide the part value or written info stamped on the inductor on the circuit board that connects to pin 8 of the 2P102 power trench mosfet IC. I think it is a ferrite device somewhere between 1 and 10 uh. Thanks :)

Re: Help with ST340014A please ...

May 25th, 2009, 15:44

Why, is it broken ?

Re: Help with ST340014A please ...

May 25th, 2009, 21:47

Its missing. :(

Re: Help with ST340014A please ...

May 26th, 2009, 0:42

This is a ferrite coil marked 3R3, most likely 3.3µH.

Jono

Re: Help with ST340014A please ...

May 26th, 2009, 19:20

Thanks Jono. I'll give it a try

Regards :)

Re: Help with ST340014A please ...

May 31st, 2009, 10:56

The 3.3 uh done the trick. The drive is upl and passes all diags. The -5V supply looks good. Thanks again :D :D :D
Post a reply