Toshiba MK1031GAS P-List problem

[rober005]

Hello,

I have a problem with a drive. When you switch on the hard disk it calibrate perfectly( in a pc-3000 ), but if you try to do a read test, or to open the structure the drive starts to heading.

Then I try to test it with the Toshiba application for the PC-3000 and the results of the test it's that the P-List is bad or corrupted.

I was looking for a solution all over the forum and internet, but I found nothing.

Thank you.

[BlackST]

Did you ask support?

[rober005]

Toshiba told me that 'they don't give this type of support' .

[HardDiskBug]

He means the PC-3000 Support...

[BlackST]

[guru]

Toshiba know and have access to nothing.... Only the geeky engineers locked away in their Toshy Factory know.......

Why not say "Toshiba System STorage Devision Please PM me some secret factory infomation to help me eat bread and sh1t in the mornings"

I will wait for a PM and download link

[BlackST]

LOL !!

[N.C.]

Toshiba told me that 'they don't give this type of support' .

Toshiba or any of the mfg will not give any support for DIY recovery.
Only supports the own services, or the company wich have a contract with mfg...

Janos

[rober005]

Support told me that I may copy a P-list from another toshiba. I take another toshiba, same model, same firmware, but it's impossible to copy the P-list.

Anybody have a solution??

Thanks

[dobrevjetser]

copying the plist from another toshiba would for sure ruin your data.
Plist is specifik to a drive and cannot be replaces by a copy from another drive.

Dobre

[rober005]

I know that 'dobrevjetser'. I don't understand qhy they told me that

[guru]

THEY KNOW NOTHING .. Seriously... support have NO ACCESS to technical information

[BlackST]

... as it is supposed to be

[guru]

looool

[rober005]

Can anybody help me please??

[BlackST]

Rober005, in a nutshell, NO.

[guru]

if you have the amazing tech support contract I would ASK Acelab ........