Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
June 2nd, 2009, 11:44
I've accumulated loads of various ide-sata adapters over the last few years. I've noticed that some of them are great for everything and some of them are not. Anyone have any particular ones that they like or recommend? One particular desire is known compatibility with salvation/pc3000. Some of the ones I have here work fine with them, and some of them randomly lock up (which is very bad when, say, reading/writing flash rom contents, etc)
June 2nd, 2009, 12:05
I just bought some VPD-S2P. Neat design i must say, quite robust AND no hassle with separate power cable.
Still have to test them thoroughly with PC3K, but first test did not show a problem.
Best regards,
Dobre
June 2nd, 2009, 13:31
Thanks, do you have a link to a site that carries those? I'm not turning anything up on Google.
June 3rd, 2009, 3:02
I ordered mine at cd-writer.com, but it is also sold in the US.
http://shop.cd-writer.com/catalog/ide-t ... 43840.htmlThe picture however does not match what i got.
Mine has power connector next to ide cable and at the sata side it is also one connector that has signal and power entry.
Dobre
June 3rd, 2009, 3:06
I tested JMicron chip works fine for me
Powered by phpBB © phpBB Group.