Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
July 12th, 2009, 18:53
hello
i made a cable with this one dku-5 in order to repair my drive (it wasn't recognize in my bios thx seagate)
now when i plug the rx and tx on the hdd, i have nothing in the hyperterm...
when i connect tx and rx i have a return in the terminal
can anybody help me ?
i tried to switch rx and tx on the drive but still the same...
an idea ?
July 13th, 2009, 3:39
First choice (recommended)........... take to a pro who knows what they're doing, this should be a cheap fix.
Second choice (NOT recommended).......... Read again the LBA 0 fix for 7100.11 in this forum, and check the baud rate. Not all 7200.11 display terminal btw.
Powered by phpBB © phpBB Group.