Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
July 19th, 2009, 20:48
Is it so bad? or this rate of errors and re locations are normal?
I am considering to change it out by Seagate manufacture warranty,
will they change it with this SMART?
1.5TB ST31500341AS
Name Val Worst Raw
Att # 1 : Read error rate : 119 99 234097116
Att # 3 : Spin up time : 98 92 0
Att # 4 : Number of spin-up times : 100 100 619
Att # 5 : Reallocated sectors count : 1 1 4095
Att # 7 : Seek error rate : 70 60 12385715
Att # 9 : Power-on time : 98 98 2307
Att # 10 : Spin-up retries : 100 100 3
Att # 12 : Start/stop count : 100 100 113
Att # 184 : Unknown : 100 100 0
Att # 187 : Unknown : 1 1 279
Att # 188 : Unknown : 1 1 2633731
Att # 189 : Unknown : 6 6 94
Att # 190 : Unknown : 55 52 774504493
Att # 194 : HDA Temperature : 45 48 45
Att # 195 : Hardware ECC recovered : 50 30 234097116
Att # 197 : Current pending sectors : 100 100 0
Att # 198 : Offline scan UNC sectors : 100 100 0
Att # 199 : Ultra ATA CRC Error Rate : 200 200 0
Att # 240 : Unknown : 100 253 2297
Att # 241 : Unknown : 100 253 2702598188
Att # 242 : Unknown : 100 253 2901064721
Blocks erased with EraseWaits: 24314
Time spent: 09:27:53
Blocks < 3ms = 11280882
Blocks < 10ms = 145342
Blocks < 50ms = 33851
Blocks < 150ms = 12493
Blocks < 500ms = 6550
Blocks > 500ms = 0
Errors: 0, Warnings: 6550
July 20th, 2009, 19:13
4095 reallocated sectors? Yeah, that's bad.
Powered by phpBB © phpBB Group.