Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
July 23rd, 2009, 0:39
Hi Guys
I have Maxtor 6H500R0 with these errors:
Unable to access data, the drive DRD fine, but cant access data.
Any help much appreciated.
----------------------------------------------------------------------------------------------
UBA : ID : Size : Module : Importance : Read : Header : CS
----------------------------------------------------------------------------------------------
0 : FF : 4 : [RCT0] : As : Yes : Ok : Ok
0 : FF : 4 : [RCT0] : As : Yes : Ok : Ok
28 : 1F : 1 : DISK : B : Yes : Ok : Ok
28 : 1F : 1 : DISK : B : Yes : Ok : Ok
29 : 21 : 24 : RCTF : As : Yes : Ok : Ok
29 : 21 : 24 : RCTF : As : Yes : Ok : Ok
125 : 1E : 2 : SRV : As : Yes : Ok : Ok
125 : 1E : 2 : SRV : As : Yes : Ok : Ok
265 : 1A : 1 : SECU : C : Yes : Ok : Ok
265 : 1A : 1 : SECU : C : Yes : Ok : Ok
266 : 2F : 1 : [SMRT_T] : C : Yes : Ok : Ok
266 : 2F : 1 : [SMRT_T] : C : Yes : Ok : Ok
267 : 30 : 1 : [SMRT_A] : C : Yes : Ok : Ok
267 : 30 : 1 : [SMRT_A] : C : Yes : Ok : Ok
268 : 63 : 1 : [SMRT_AC] : C : Yes : Ok : Ok
268 : 63 : 1 : [SMRT_AC] : C : Yes : Ok : Ok
290 : 22 : 1 : ATAF : B : Yes : Ok : Ok
290 : 22 : 1 : ATAF : B : Yes : Ok : Ok
294 : 34 : 256 : ARREH : Dr : Yes : Ok : Ok
294 : 34 : 256 : ARREH : Dr : Yes : Ok : Ok
550 : 48 : 1 : [LABEL] : Dr : Yes : Ok : Ok
550 : 48 : 1 : [LABEL] : Dr : Yes : Ok : Ok
551 : 1D : 2 : DMCS : C : Yes : Ok : Ok
551 : 1D : 2 : DMCS : C : Yes : Ok : Ok
606 : 64 : 1 : MAXATG : B : Yes : Ok : Ok
606 : 64 : 1 : MAXATG : B : Yes : Ok : Ok
630 : 5E : 273 : EVTLG : Dr : Yes : Ok : Ok
630 : 5E : 273 : EVTLG : Dr : Yes : Error : Ok
953 : 93 : 128 : FMTI : Ad : Yes : Ok : Ok
953 : 93 : 128 : FMTI : Ad : Yes : Ok : Ok
903 : 70 : 1 : [SMART_SUMMAR] : Dr : Yes : Ok : Ok
903 : 70 : 1 : [SMART_SUMMAR] : Dr : Yes : Ok : Ok
904 : 71 : 1 : [SMART_ST] : Dr : Yes : Ok : Ok
904 : 71 : 1 : [SMART_ST] : Dr : Yes : Ok : Ok
905 : 72 : 32 : [SMART_HOSTV] : Dr : Yes : Ok : Ok
905 : 72 : 32 : [SMART_HOSTV] : Dr : Yes : Ok : Ok
945 : 7B : 8 : FW : Dr : Yes : Error : Ok
945 : 7B : 8 : FW : Dr : Yes : Error : Ok
1 273 : 95 : 1 : [DISK/PW] : Dr : Yes : Error : Ok
1 273 : 95 : 1 : [DISK/PW] : Dr : Yes : Error : Ok
2 308 : 39 : 256 : [ROM SA] : B : Yes : Ok : Ok
2 308 : 39 : 256 : [ROM SA] : B : Yes : Ok : Ok
2 564 : 38 : 160 : [OVL ATA] : B : Yes : Ok : Ok
2 564 : 38 : 160 : [OVL ATA] : B : Yes : Ok : Ok
2 724 : 4F : 1792 : [OVL Tech] : B : Yes : Ok : Ok
2 724 : 4F : 1792 : [OVL Tech] : B : Yes : Ok : Ok
8 982 : 33 : 2048 : [HUTL/HUSR] : Dd : Yes : Ok : Ok
553 : 23 : 50 : AT_POL 3 : C : Yes : Ok : Ok
553 : 23 : 50 : AT_POL 3 : C : Yes : Ok : Ok
1 556 : B7 : 512 : PDM_LST : C : Yes : Ok : Ok
1 556 : B7 : 512 : PDM_LST : C : Yes : Ok : Ok
8 : B8 : 20 : UA_LST : C : Yes : Ok : Ok
8 : B8 : 20 : UA_LST : C : Yes : Ok : Ok
4 : BA : 1 : POR_A : C : Yes : Ok : Ok
4 : BA : 1 : POR_A : C : No : :
----------------------------------------------------------------------------------------------
July 23rd, 2009, 3:32
fixed mod BA, 7B, 95 and 5E, same problem, cant access data. Maybe read channel if weak?
July 23rd, 2009, 3:34
No, if you get ABRT on all sector without delay, this is SA problem!
July 23rd, 2009, 3:39
ABRT only occurs on certain sectors not all
July 23rd, 2009, 5:12
this series have 8 head. and I got a lot that got problem with weak head.
You can create head map to make sure...
July 23rd, 2009, 5:12
can you upload one screenshot from mhdd scan?
July 23rd, 2009, 6:24
Hi Aping
Yes i tried create headmap but failed ater few thousand sectors, it wont go any further and power off and on sometimes.
NC, Express Test failed also after few thousand sectors it gives errors.
July 23rd, 2009, 12:33
TerraNova wrote:.. it wont go any further and power off and on sometimes.
Does it power off/on when you are creating the head map? Spinning down/up completely? clicking?
July 23rd, 2009, 12:48
TerraNova wrote:Hi Aping
Yes i tried create headmap but failed ater few thousand sectors, it wont go any further and power off and on sometimes.
NC, Express Test failed also after few thousand sectors it gives errors.
I was asked screenshot, not your comments and opinions.
July 28th, 2009, 7:32
Managed to clone the drive with h5 off, but the damn drive is NAS broadcom, as usual you all know ....what a PITA!
Powered by phpBB © phpBB Group.