SEAGATE ST340015A 40 GB BSY

[ccamargol]

Hi,

I have a disk with BSY problem... spin up but show always BSY..

Please help me.. exists terminal commands for repair this disk?

thank.

[pcimage]

Yes, terminal exists.

A good terminal response would look like this....

Interface task reset
Hd Msk 0A00 - Switch to full int.
Ready
C2 - ST340015A(S) Grand 2A3, Head 12
ROM.02.03ATRst
PMstr

[rameez]

You should post the terminal log if you need help .

[ccamargol]

Yes i need your help.

I using Hyperterminal and i press Ctr + Z and show T> now what i do?

Help!!!

[ccamargol]

Show this:

Interface task reset

Ref 01FF - Hd Msk 0A00 - Switch to full int.
Ready

[beto]

So does it mean reach T> , tried to check if Read LBA, and AGE, u can tried to check if answer to the Read Sector ATA Command 20h,

[learner]

hello beto can you please suggest some non destructive commands for this?

[pepe]

press ; and . in terminal and post result here.

pepe

[ccamargol]

T>C2 - ST340015A(S) Grand 2A3, Head 12
ROM.02.03


When (.)
T>Pgm=50 Trk=000073(000073).0.0CA Zn=00 Err=00 ErCt=0000 Hlth=0000 CHlth=0000 Nt
rdy

When (;) Invalid ?
T>;
Invalid Entry

Please help me

Thank

[sempre]

T>C2 - ST340015A(S) Grand 2A3, Head 12
ROM.02.03


When (.)
T>Pgm=50 Trk=000073(000073).0.0CA Zn=00 Err=00 ErCt=0000 Hlth=0000 CHlth=0000 Nt
rdy

When (;) Invalid ?
T>;
Invalid Entry

Please help me

Thank

Hello to all!!
I have a hdd with the same problem...

look log

Interface task reset
Hd Msk 0A00 - Switch to full int.
Ready

T>
T>C2 - (S) Grand 2A3, Head 12
ROM.02.03
C2 - ST340015A(S) Grand 2A3, Head 12
ROM.02.03

e c r = 0 0 1_!ls__!ls__!ls_e_!ls__!ls_!_!ls_!_!ls__!ls__!HlzHy_!py_G,_m,UlzH.b,_l,_E,_y_h,_y_Lls__!ls__!ls__!ls__!ls__!ls_!_!ls_!_!ls_!_!ls__!ls__!HlzHy_!py_G,_myUlzH.bycUlzH.b,cUlzH.b,_ly_E,_,_h,_,cUlzH.b,_l,_E,_,_h,_,_Lls_!_!ls_cUlzH.b,!_!ly!_!Ey!_!y!_!hy!_!y!_!Lls_!_!ls__!ls__!ls__!ls_!_!ls_UlzH!.by!_!ly!_!Ey!_!y!_!hy!_!y!_!Lls_!_!ls_Ulz
T>H.b,_l,_E,_y_hy_,_Lls__!ls__!ls__!ls__!ls_Z_!ls_
Invalid Entry
T>
T>_!ls_Z
Invalid Entry
T>_!ls_!_!ls_Ulz
T>
T>
T>
T>Key 06h Err!
HInterface task reset

Ref 01DA - Hd Msk 0A00 - Switch to full int.
Ready

[rameez]

It says error in Key 06.
You should try rewriting key #6 .

[sempre]

Interface task reset
Hd Msk 0A00 - Switch to full int.
Ready
C2 - (S) Grand 2A3, Head 12
ROM.02.03

heads dirty?