Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

WD5000AAJS - capacity 15GB, detected as TORNADO3....

August 11th, 2009, 15:58

No access to data. Windows is starting very slowly with presence of disk. Disk detected as WDC ROM MODEL-TORNADO3. Trying scan with MHDD (see all "!") and trying to set HPA but no effect. Attached screens of Victoria.

On top cover is written:

WD5000AAJS - 22TKA0
DCM: DHNCNV2AHB
LBA: 976773168

Disk detected at Windows Device Manager after "Scan for nwe devices...". Recognized LBA by Victoria is wrong. How to set good capacity?

Is it translator modules damaged...?
Attachments
vic4.JPG
vic3.JPG
vic2.JPG
vic1.JPG

Re: WD5000AAJS - capacity 15GB, detected as TORNADO3....

August 11th, 2009, 16:27

firmware is bad or single head failure. beyond your capabilities.

Re: WD5000AAJS - capacity 15GB, detected as TORNADO3....

August 12th, 2009, 0:49

Could also be PCB failure, which can mimic bad heads.

Re: WD5000AAJS - capacity 15GB, detected as TORNADO3....

August 12th, 2009, 4:08

PCB.

Re: WD5000AAJS - capacity 15GB, detected as TORNADO3....

August 12th, 2009, 4:26

Bet I'm right :wink:

Re: WD5000AAJS - capacity 15GB, detected as TORNADO3....

August 16th, 2009, 0:00

I think I've seen more of these come in clicking that ended up being the board than I have the heads being bad, especially the AAJS drives.

Re: WD5000AAJS - capacity 15GB, detected as TORNADO3....

August 26th, 2009, 10:30

Have you investigated any further what exactly was bad on the PCBs?
Would this also be true for AAVS models?
Post a reply