HD103UJ

[zebong]

Hi to all,

Have this in terminal;


PSL

++ SU
MaxPhyHead = 0006
RPM at Handoff: 01FB
UtSHOS - Released on 2008/06/19 19:05 by Administrator
DRAM=32MB SoC=26A3
SHOS-(1AA13atM.a38)
L=00000000,00000000
<SpinOn_2>KeepSpinOn!
RV Circuit Enabled
Temp : 22 degC
SpinOk
mServoStatus1 00000003
UF 3 1stGrayErr
Vel Parking!
PK_3 C: 0 H:0
SK C:105914 H:1

S_0AP:1 C: 4000 H:0
UF 3 1stGrayErr
SK C: 6165 H:1

S_0AP:1 C: 4000 H:0
UF 3 1stGrayErr
SK C: 8841 H:1

S_0AP:1 C: 4000 H:0
UF 3 1stGrayErr
SK C: 9754 H:1

S_0AP:1 C: 4000 H:0
UF 3 1stGrayErr
SK C: 10768 H:1

S_0AP:1 C: 4000 H:0
UF 3 1stGrayErr
SK C: 11410 H:1

S_0AP:1 C: 4001 H:0
UF 3 1stGrayErr
SK C: 13549 H:1

S_0AP:1 C: 4000 H:0
UF 3 1stGrayErr
SK C: 14155 H:1

S_0AP:1 C: 4000 H:0
UF 3 1stGrayErr
SK C: 14527 H:1

S_0AP:1 C: 3999 H:0
UF 3 1stGrayErr
SK C: 15207 H:1

S_0AP:1 C: 4000 H:0
UF 3 1stGrayErr
SK C: 14778 H:1

S_0AP:1 C: 4001 H:0
UF 3 1stGrayErr
SK C: 14525 H:1

S_0AP:1 C: 4001 H:0
UF 3 1stGrayErr
SK C: 15628 H:1

S_0AP:1 C: 4000 H:0
UF 3 1stGrayErr
SK C: 15662 H:1

S_0AP:1 C: 3999 H:0
UF 3 1stGrayErr
SK C: 15718 H:1

S_0AP:1 C: 3999 H:0
UF 3 1stGrayErr
SK C: 16391 H:1

S_0AP:1 C: 4000 H:0
UF 3 1stGrayErr
SK C: 16779 H:1

S_0AP:1 C: 4000 H:0
UF 3 1stGrayErr
SK C: 16346 H:1

S_0AP:1 C: 4000 H:0
UF 3 1stGrayErr
SK C: 17140 H:1

S_0AP:1 C: 4000 H:0
UF 3 1stGrayErr
SK C: 16655 H:1

S_0AP:1 C: 4000 H:0
UF 3 1stGrayErr
SK C: 16850 H:1

S_0AP:1 C: 4000 H:0
UF 3 1stGrayErr
SK C: 17430 H:1

S_0AP:1 C: 4000 H:0
UF 3 1stGrayErr
SK C: 16852 H:1

S_0AP:1 C: 4000 H:0
UF 3 1stGrayErr
SK C: 17668 H:1

S_0AP:1 C: 4000 H:0
UF 3 1stGrayErr
SK C: 18490 H:1

S_0AP:1 C: 4000 H:0
UF 3 1stGrayErr
SK C: 17863 H:1

S_2 00000FFF 0000004B 00000000 00000000AP:1 C: 4000 H:0
UF 3 1stGrayErr
SK C: 18445 H:1

S_0AP:1 C: 4000 H:0
UF 3 1stGrayErr
SK C: 17950 H:1

S_0AP:1 C: 4000 H:0
UF 3 1stGrayErr
SK C: 17570 H:1





First time i connected the drive i could have ID and start to clone it, with some bad sectors.

When i power off the drive i never more get ID, hear a small noise when it appears that in terminal, but complete diferent from other samsung drives when have BAD HEADS.


Do not know is is the head 0 or the head 1 with problems.


Any Comment

Thanks
ZeBong

[Russwinters]

Well; my knowledge of samsungs is certainly not what I would call "expert"


but it definitely looks like it is having trouble even reading/interpreting servo.


I would think heads/some sort of issue with the platters



But I would wait until BlackST rings in on this one. He seems to have the highest level of knowledge in Samsungs

[dobrevjetser]

Last time i got this i had bad heads AND media damage.

Dobre

[zebong]

Yes i had similar logs like this and the media was damage also.

This one i am analyzing it without open.

But the noise is very very soft complete different from the other ones.

Also when i could get ID , i have test the heads and they pass in the UDMA.