Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
October 27th, 2009, 5:22
i have a 3pcs hdd that cannot format and when you break the partition and create a new one it reverts from its original os.. i mean the drive has os and when you want to format it doesnt accept or says that unable to format.. the problem there is IT REVERTS to its original os although i destoryed the partition..
what should i do?? please help.. thanks..
October 27th, 2009, 8:52
The key question is, what do you want exactly?
October 27th, 2009, 20:34
i want to format the drive.. to use it in other pc..
October 27th, 2009, 20:37
You either have a problem with your 3 computers or there is a problem with a drive.
October 27th, 2009, 20:59
there's no problem with my computers because i brought a drive for it and it works correctly..
what should i do with the drive??
October 28th, 2009, 3:05
If your computers are all OK, than RMA the drive, and will get a working one.
October 29th, 2009, 20:21
what rma stands for??
October 29th, 2009, 20:33
warranty
October 29th, 2009, 20:36
is there a possible way to repair my drive??
October 29th, 2009, 21:05
what's your drive model ?
Maxtor diamond max plus 9 ?
October 29th, 2009, 21:21
seagate barracuda.. 80gb sata and 2pcs 80gb ide..
they have the same problem..
November 18th, 2009, 20:41
does anyone can help me with this??
November 19th, 2009, 3:35
N.C. said:
If your computers are all OK, than RMA the drive, and will get a working one.

Did you find out your answer?
November 25th, 2009, 20:21
not yet.. =(
Powered by phpBB © phpBB Group.