Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
October 28th, 2009, 13:45
Hello,
First : excuse my school-english
I have made a Magic Boot Disk on CD. On boot, I cannot see my C:\ partition. But I see very well all others partitions !
Please, how can I do to see it ?
Many thanks.
October 30th, 2009, 13:15
up
October 30th, 2009, 13:51
OK UP
Try to clone your disk then get or find a good partiton repair program and check you partiton table
October 30th, 2009, 14:03
poehere wrote:OK UP
Try to clone your disk then get or find a good partiton repair program and check you partiton table
Ok ! I'm making that !
October 30th, 2009, 14:28
Ne travaillez pas le disque dur origianal. Le travail seulement sur la copie du disque dur. Je ne suis pas sûr s'ils l'ont dans la Langue française et vous devriez utiliser dans la langue anglaise. Mais si vous avez des problèmes un bureau de récupération de données près de vous devrait être capable de faire ce travail. Cela devrait être une réparation facile sur votre disque dur et ne pas vous coûter beaucoup d'argent. Bonne chance.
Do not work on the origianl hard drive. Work on from the copy. I am not sure if you can find this program in French and might have to use it in English. If you have problems a DR office near you should be able to do this for you. It should not cost you too much for this work. Good luck. Sorry my French is rusty I did not go to school all my life in France but you understand this and should be able to go from here.
October 31st, 2009, 4:46
Good morning the France of the world end,
Thanks for your intervention. I simply wanted to try this "Boot Magic". I do not have particular need. I think it is interesting. But I do not understand why I do not see my main partition... though I see the others.
and I tried all the letters.
See you soon !
Powered by phpBB © phpBB Group.