Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

Tried to fix 7200.11 seagate and got strange results

November 17th, 2009, 5:13

i tried to boot the pc one day, and it wouldnt.
got the pc to a lab, they said, hd isnt beeing recognized.
didnt take me long to find out all about the 7200.11 seagate saga.

i tried the fix in sites.google.com/site/seagatefix , i didnt have the rs232 to ttl so somone made one for me from a circute i found on the web.

i tried the fix and than, hd was detectble. i could see every file in dos ona different pc than mine i could not load vista on that drive it had some file missing, but it did try to run vista.

i took the drive and conected it to a different pc as a non os drive, just to take the files out.
it was recognized.
it took it a while but it found drive d and i could see all the files there (pics were opening in thumbnails,it was all there) c: wasnt detected and said that drive needed reformating.
i started to copy d: to back up, i got 5 min of backup and d dissapeared. i got about 6 gigs of stuff that was mosly backed up, didnt get the unbacked stuff.
next time i booted both c and d were detected but un avalible, next hd wasnt detected by bios. sometimes it was sometimes it wasnt but c and d werent even in my computer anymore.
and every time i start it gives 3 clicks of death and starts spining.

i sent drive to a data recovery company, after 24 hours they said it had a head crash and nothing is accessible (but i suspect its a company that doesnt try to do anything if it takes too long to fiddle with the drive)
my question is, if it was a head crash how come using the fix revived the hd for a short time,
is it possible i did the fix wrong and the pcb is screwing the hd reading attempts?
all the other company did is open the cover and look, they didnt try anything else.
any sugestions?
(yesterday i got the original rs232 to ttl actually used in the fix from vendor the guy fixing it used mybe using it would work?)

thank you

Re: Tried to fix 7200.11 seagate and got strange results

November 17th, 2009, 8:38

i would guess translator got corrupt because of either lots of bad sectors or a failing/failed head.

Get a second opinion from another company.

Re: Tried to fix 7200.11 seagate and got strange results

November 18th, 2009, 18:20

any suggestions for a good data recovering company?

they all ad the same . hard do know who is good and who isnt.

Re: Tried to fix 7200.11 seagate and got strange results

November 18th, 2009, 18:22

where are you located ?

Re: Tried to fix 7200.11 seagate and got strange results

November 19th, 2009, 10:39

doesnt matter.

ill send it wherever needed.

to world is 50$ away from side to side.

Re: Tried to fix 7200.11 seagate and got strange results

November 19th, 2009, 17:06

If I knew your location, I could recommend somebody...

This way I can only recommend myself, hehe.
Or everybody else, hehe.

make your choice :)

pepe

Re: Tried to fix 7200.11 seagate and got strange results

November 20th, 2009, 10:02

im from israel
Post a reply