SEAGATE 7200.10

[zebong]

Hi to all,

Have this in terminal the disk can get DRD DSC, but no ID.


Reset
1024k x 16 DRAM
NHAWK - 1_Disk S-42 03-27-07_11:48

Buzz HM SFI
!
(P)SATA Reset
AT Er 00 Nwt Er 43 RdWr 02eb9.00.0105
ATA St 50 Er 01 Op 00 0,0000/0/00,00 01 00
Niwot: 017200f7 b6 017200f7.0.88b 0000 005f 0000 0000 c67178
DiskAccess ReadSector EC=43 at 002eb9.00.0105

CE Log ErrCode=43 LBA=102f864 Type=5 Add To Pending 102f864

CorrectWriteStart
AT Er 00 Nwt Er 22 RdWr 02eb9.00.00bd
ATA St 50 Er 01 Op 00 0,0000/0/00,00 01 00
Niwot: 0102f75f 14 0102f75f.0.000 0105 088d 0105 0000 c6745e

CorrectWriteStart
AT Er 00 Nwt Er 22 RdWr 02eb9.00.00bd
ATA St 50 Er 01 Op 00 0,0000/0/00,00 01 00
Niwot: 0102f81c 14 0102f81c.0.000 0048 094a 0105 0000 c6745e

CorrectWriteStart
AT Er 00 Nwt Er 22 RdWr 02eb9.00.0103
ATA St 50 Er 01 Op 00 0,0000/0/00,00 01 00
Niwot: 0102f81c 14 0102f81c.0.000 0048 094a 0105 0000 c6745e



Any suggestion ?

Regards

[ccc]

This is CE log error .....Depending of the tools you have it may be easy or not to resolve it.
Rgds

[hddmania]

PM Sent a while ago...

[zebong]

I have the UDMA and SD.

But when i det DRD DSC i can not have ID, in the UDMA, the log continue and just give the first error CE LOG error the other ones is diferent, but with the same values.


When i enter in terminal command the LOG stop.

Regards

[ccc]

Hi
Stop the log by enter Ctrl+Z in terminal.....For SD ,AFAIK there are 2 buttons CE log repair and CE log remove...For udma I don't know , cause I don't have it....
Rgds

[HDD Spaz]

You tried data extractor function for these drives?