Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
December 14th, 2009, 17:54
Does any one knows how to do head alignment in Western Digital Hard drives.
Regards
December 14th, 2009, 18:13
Is that a survey?
December 14th, 2009, 18:17
December 14th, 2009, 21:01
Does any one knows how to do head alignment in Western Digital Hard drives.
yes.
December 14th, 2009, 21:23
Farhan709 wrote:Does any one knows how to do head alignment in Western Digital Hard drives.
Regards
Yes.
December 14th, 2009, 22:12
Good
Now my 2nd question is how can I do that ?
December 14th, 2009, 22:27
Hi,
this is the 10.000$ question today

pepe
December 14th, 2009, 22:43
Farhan709 wrote:Good
Now my 2nd question is how can I do that ?
I think this is your first question but you have started this topic from the second one by mistake
The answer on your question is - you cannot do it because if you can you wouldn't start this topic
If you seeking for the free step by step guide to do such a job I suggest you to stop
December 15th, 2009, 12:00
Farhan709 wrote:Good
Now my 2nd question is how can I do that ?

1. Remove old heads
2. Install new heads
3. Play around for several hours/days/weeks to see if it works
December 15th, 2009, 16:40
Powered by phpBB © phpBB Group.