SEAGATE SCSI PROBLEM, CAPACITY=48MB

[AOnD]

Hello everybody!

My Scsikernel's scream is shown:

Seagate

Mode Sense page loading...
User area cylinder count................ : 50824
Head count.............................. : 8

Set techno mode......................... : Ok
Load zone table from HDD Head : 0....... : Zone table data error
Load zone table from HDD Head : 1....... : Zone table data error
Load zone table from HDD Head : 2....... : Zone table data error
Load zone table from HDD Head : 3....... : Zone table data error
Load zone table from HDD Head : 4....... : Zone table data error
Load zone table from HDD Head : 5....... : Zone table data error
Load zone table from HDD Head : 6....... : Zone table data error
Load zone table from HDD Head : 7....... : Zone table data error
Load zone table from HDD................ : Zone table not loaded!
Load zone table use ModeSense........... : ASPI Command exec error

Zone allocation table has not been loaded. Some tests may be inaccessible.
Please load the zone allocation table by HDD scanning or from a file.

SA SPT and final cylinder of SA has not been loaded.
Please enter values manualy or load it from file.

Maybe If this is happend in many hard disks that I have...I'm thinking that maybe is the PCI SCSI that is incompatible because I watched another posts and they could load the "Zone table" and I can't...so... my conclusion is that this error maybe is for the incompatibility of my PCI SCSI and the error of "ASPI Command exec error" is from the 48MB, firmware problem, ISN'T IT?

Does anybody know anything about all of it?

Thanks!!!