SEAGATE 7200.7 80GB

[zebong]

Hi to all,


Have this Seagate disk that give this in terminal them GET ready DRD DSC


Interface task reset
1024k x 16 buffer detected
ALPINE - 1_Disk S.15 02-08-03 15:03

Buzz - Head Mask 0000 - Head Mask 0000 - Switch to full int.
Spin Ready
3.06 08-08-03 14:05
(P)PATA Reset
$NIWOT TIME OSwitch to full int.
UT
AM Reacquired
Master
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$(S)PATA Reset
Switch to full int.
AM Reacquired
Master
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
$Switch to full int.
AM Reacquired
AT Er 00 Nwt Er 37 RdWr 0029.00.0001
ATA St 50 Er 01 Op 00 0,0000/0/00,00 01 00
Niwot: 0000fedc ff 0000fedc.0.000 00db 0000 e0e8 0001
AutoRd Err 43 at 000029.01.01ef
SCAN Error
AT Er 00 Nwt Er 43 RdWr 0029.00.0001
ATA St 50 Er 01 Op 00 0,0000/0/00,00 01 00
Niwot: 0000fedc ff 0000fedc.0.000 00db 0000 e0e8 0001
AutoRd Err 43 at 000029.01.01f2

CE Log EC=43 Rtype=25 OV=0 STStatus0
SCAN Error
AT Er 00 Nwt Er 43 RdWr 0029.00.0001
ATA St 50 Er 01 Op 00 0,0000/0/00,00 01 00
Niwot: 0000fedc ff 0000fedc.0.000 00db 0000 e0e8 0001
AutoRd Err 43 at 000029.01.020f

CE Log EC=43 Rtype=25 OV=0 STStatus0
SCAN Error
AT Er 00 Nwt Er 47 RdWr 0029.00.0001
ATA St 50 Er 01 Op 00 0,0000/0/00,00 01 00
Niwot: 0000fedc ff 0000fedc.0.000 00db 0000 e0e8 0001
AutoRd Err 47 at 000029.01.0210

CE Log EC=47 Rtype=25 OV=0 STStatus0
$NIWOT TIME OSwitch to full int.
UT
AM Reacquired
SCAN Error
$Switch to full int.
AM Reacquired
AT Er 00 Nwt Er 47 RdWr 0029.00.0001
ATA St 50 Er 01 Op 00 0,0000/0/00,00 01 00
Niwot: 0000fedc ff 0000fedc.0.000 00db 0000 e0e8 0001
AutoRd Err 47 at 000029.01.028a

CE Log EC=47 Rtype=25 OV=0 STStatus0
SCAN Error
AT Er 00 Nwt Er 43 RdWr 0029.00.0001
ATA St 50 Er 01 Op 00 0,0000/0/00,00 01 00
Niwot: 0000fedc ff 0000fedc.0.000 00db 0000 e0e8 0001

CE Log EC=43 Rtype=24 OV=0 STStatus0
AT Er 00 Nwt Er 43 RdWr 0029.00.0001
ATA St 50 Er 01 Op 00 0,0000/0/00,00 01 00
Niwot: 0000fedc ff 0000fedc.0.000 00db 0000 e0e8 0001
AutoRd Err 43 at 000029.01.02a1

CE Log EC=43 Rtype=25 OV=0 STStatus0
$Switch to full int.
AM Reacquired
SCAN Error



When i edit sectors e can get it OK, but some sectors i can not read.

Change heads and happen the same.

This CE Log error can i use SD Seagate to remove it ? anyone have try this ?



Regards

[pcimage]

I have used SD Seagate to fix this error and so far it's worked every time, but I don't remember the "AM reacquired" or the "$" in my cases.

[N.C.]

this is head problem

[zebong]

this is head problem

Yes it was that i think on the first time, so i change heads and the LOG is the same.

Some sectors i can read it well "green" 50 to 90 sectors them "1" i can not read it, them i can read more 100 and "1" i can not read it, and is doing this all the disk.

I am thinking that maybe it have a scrtach, but if it was a scratch i should have BAD more them "1" sector.

[jackk]

Is this through microsoft terminal or pc3000?

[drc]

Can also be problems with platter wobble, alignment, eccentricity, etc

[HDD Spaz]

has this disk had a platter swap?

[zebong]

has this disk had a platter swap?

no did not, it had inside a computer, and it was not a external disk.

[Arthur]

I think that this most probably is a head issue. Have you created a head map? This is a two head drive ? Right? Test copying from one head at the time. (Test from different places on disk) If this works, pay closely attention to the terminal window and notify when and where the $Switch to full int. AM Reacquired messages is displayed.

[networkpc3000]

most is head have problem