Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
December 20th, 2009, 2:23
Good Day
i have HP Proliant ML350 Server it has RAID 5 Configured in SAS HDD's now it is showing logical Drives are Disable when i try to enable it one message appears "All data might be destroy" if i enable logical Drives i don't have any SAS connector to connect and take image or backup, RAID controller is Smart Array E200I if anyone how to solve it please let me know Thanks.
December 20th, 2009, 8:33
We've seen quite a few of these 350's with SAS HDD's with similar problems.
You need to buy a SAS controller and image the individual drives and rebuild with Winhex or your preferred tools.
December 21st, 2009, 1:53
Good Day
Ck Thank u for reply do u have any picture or link of that connector.
December 21st, 2009, 4:11
December 21st, 2009, 5:42
Thank You Ck.
December 21st, 2009, 9:30
You also need to ensure the SAS card you purchase is a Host Bus Adaptor and not a RAID controller, a SAS RAID controller will require you to initialise each disk before installing them into BIOS.
December 28th, 2009, 9:33
Good Day
Thank u HDDGuy could u send me any picture or link of that Card Thanks again for u r information.
Powered by phpBB © phpBB Group.