Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

Seagate 7200.11 and Reallocated Sectors Count increasing

January 31st, 2010, 6:43

Hi all,

I have refurbished (RMA'd) Seagate 7200.11 ST3500320AS that was working ok for a few months.

Last week i noticed that "Reallocated Sectors Count" increased, from 0 to 2. Yesterday I made a backup copying hundreds of GB, and this morning it has 3 relocated sectors.

Can this disk be trusted?

Thanks for help.

Re: Seagate 7200.11 and Reallocated Sectors Count increasing

January 31st, 2010, 6:58

if bad sactor in increasing mode then replace early as possible if it is in warranty.

Re: Seagate 7200.11 and Reallocated Sectors Count increasing

January 31st, 2010, 21:31

RMA this drive.

Re: Seagate 7200.11 and Reallocated Sectors Count increasing

February 1st, 2010, 15:34

if the FW of the drive is SD15- backup and RMA asap. I am pretty sure those drives briked cause of relocation sector count and FW issue. Anyways , get HDD scan of this site. Run a SMART test. Ull see if ur reloc count is in the red or yellow.

Re: Seagate 7200.11 and Reallocated Sectors Count increasing

February 2nd, 2010, 1:39

with software http://www.hdsentinel.com/dl.php check smart and see overview for smart

and why increasing relocation sector?
Post a reply