disk failures

[ub007]

I keep ending up with multiple drive failures on my server. Configured -RAID 6, 1 TB WD disks
Array controller ( P800 ), hdd - all updated to latest fw versions.

The adu log says

Last Failure Reason: 0x0E (Aborted command)

Looks like the drives were failed because the drive aborted a command 'n' times. This is why the failure reason is 0x0E .

ALso hooked up a serial cable to the array controller and this is what the trace point says

Fail Device: D010 physical_req 11fd48 - reason code eh

Can anyone shed some more light on this???

Secondly,Is there any way I can get some low level info on these failures from /proc/... or some else from the kernel level?

Adu report attached

Cheers
David

Attachments

adureport.txt

Adu report attached

(105.69 KiB) Downloaded 248 times