Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

ST3500320AS - Bad sectors (?) after fixing BSY error

February 7th, 2010, 12:46

Hi all,

I fixed the BSY error of an ST3500320AS - SD15 but disk became inaccessible after 10 secs but is always visible to BIOS! I ran V commands and noticed that G-list was full again.

I am ready to post more data if anyone can help on this.

Thank you.

Re: ST3500320AS - Bad sectors (?) after fixing BSY error

February 7th, 2010, 12:58

Perhaps one of the forum member - perhaps out of your region might answer
- but a location "here it is" - does not really invite to do that ...?


+++

Re: ST3500320AS - Bad sectors (?) after fixing BSY error

February 7th, 2010, 13:17

I am sure that described problem is country-irrelevant. It can appear to any disk around the world. :)
So, I am inviting anyone who is interested to help me and not only interested to learn my bio. :?

Thank you.


PS: I am located in Europe.

Re: ST3500320AS - Bad sectors (?) after fixing BSY error

February 8th, 2010, 16:42

OK, there are several members from the EU, so surely there will be someone able to recover your data.
But to do so U have to be open just a little bit. :D

pepe
Post a reply