Seagate Terminal Output on "chirping" drive...

[gtd4242]

I had a 750GB 7200.10 Seagate come in that had first been sent to another company. The customer told me that when he sent the drive in to the first company it had a distinct clicking sound. However, when it was deemed unrecoverable by the first company, he said it had a different sound to it when he got it back. Now the drive is making the typical chirping sound that you hear when there's a weak head or a platter alignment issue. I don't know for sure if the first company left the heads in that they installed or if they put the original heads back in. The drive looked clean, and there's no obvious scoring to the platters. I can actually get the drive to come ready after a substantial amount of time in Disk Imager, and I can even image some sectors here and there. However, the drive is constantly seeking as if there is still an issue with one or more of the heads. I'm thinking either a sloppy head swap was done, or there may be some issues with head alignment. This is a clip of the terminal output I receive. It just constantly repeats these errors......

CE Log ErrCode=43 LBA=29398e73 Type=5$SFI
AMR
$SFI
AMR
$SFI
AMR
Add To Pending 29398e73
$SFI
AMR
$SFI
AMR
$$$SFI
AMR
AT Er 00 Nwt Er 43 RdWr 0df7d.06.0027
ATA St 80 Er 01 Op 00 0,0000/0/00,00 01 00
Niwot: 9ff79ff7 b6 9ff79ff7.3.640 0000 005f 0000 0000
DiskAccess ReadSector EC=43 at 00df7d.06.0027

CE Log ErrCode=43 LBA=29398e74 Type=5$SFI
AMR
$SFI
AMR
$SFI
AMR
Add To Pending 29398e74
$SFI
AMR
$SFI
AMR
$$$SFI
AMR
AT Er 00 Nwt Er 43 RdWr 0df7d.06.0028
ATA St 80 Er 01 Op 00 0,0000/0/00,00 01 00
Niwot: 9ff79ff7 b6 9ff79ff7.3.640 0000 005f 0000 0000
DiskAccess ReadSector EC=43 at 00df7d.06.0028

CE Log ErrCode=43 LBA=29398e75 Type=5$SFI
AMR
$SFI
AMR
$SFI
AMR
Add To Pending 29398e75
$SFI
AMR
$SFI
AMR
$$$SFI
AMR
AT Er 00 Nwt Er 43 RdWr 0df7d.06.0029
ATA St 80 Er 01 Op 00 0,0000/0/00,00 01 00
Niwot: 9ff79ff7 b6 9ff79ff7.3.640 0000 005f 0000 0000
DiskAccess ReadSector EC=

CE Log ErrCode=43 LBA=29398e76 Type=5$SFI
AMR
$SFI
AMR
$SFI
AMR
Add To Pending 29398e76
$SFI
AMR
$SFI
AMR
$$$SFI
AMR
AT Er 00 Nwt Er 43 RdWr 0df7d.06.002a
ATA St 80 Er 01 Op 00 0,0000/0/00,00 01 00
Niwot: 9ff79ff7 b6 9ff79ff7.3.640 0000 005f 0000 0000
DiskAccess ReadSector EC=43 at 00df7d.06.002a

CE Log ErrCode=43 LBA=29398e77 Type=5$SFI
AMR
$SFI
AMR
$SFI
AMR
Add To Pending 29398e77
$SFI
AMR
$SFI
AMR
$$$SFI
AMR
AT Er 00 Nwt Er 43 RdWr 0df7d.06.002b
ATA St 80 Er 01 Op 00 0,0000/0/00,00 01 00
Niwot: 9ff79ff7 b6 9ff79ff7.3.640 0000 005f 0000 0000
DiskAccess ReadSector EC=43 at 00df7d.06.002b


Any suggestions?

[pcimage]

Looks like classic "CE log" error.

Can be sorted out with Data Extractor, or even Salvation tool oftens makes a good job of fixing this.

You won't be able to easily overcome this with DDI alone.

[phishin_ca]

You have PM