WD4000AAKS start failure

[Hexel]

Hello gurus)
Subj WDC WD4000AAKS-00YGA0-12.01C02-WD-WCAS8527514
Powers on, spins up, few short silent clicks, spin down and ups again. After 3 times repeating this drive spins down completely. I need data from drive.
After series of tests I found a flash FW corruption: 07 and 08 mods have corrupted block CS`s (record CS`s is OK).
Is it really a FW corruption? Where to get a complete ROM? File archive have nothing suitable as I guess.
Also I must tell that there are word "ROYL" mentioned in some flash locations and modules (see attachment with logs).

What i have done so far: clean entire PCB and contacts of HDA with eraser and with solvent, examined fuses/TVS/3.3V supply (its OK). All this gave no effect.
Software: I had read flash, some modules. Check_wd utility said that there are corrupted files headers on different drive heads (see logs). While running utils drive spins up for aa short time and spins down after series of ckicks.

Attachments

WDC WD4000AAKS-00YGA0-12.01C02-WD-WCAS8527514.rar

Flash, modules, logs

(173.84 KiB) Downloaded 318 times

[BlackST]

Did you check it with PC3000 UDMA or something like that ?

[Hexel]

no just using P2 Cel 700MHz via Sata-to-IDE convertor StLab S-250 and external PSU, under DOS and COM utilities from nazyura.
model notation taken from file archive

[Hexel]

sorry, here is correct "Chk_csum.txt" file from attachment

Attachments

Chk_csum.txt

(1.53 KiB) Downloaded 518 times

[HDD Spaz]

Its usually heads. one or more heads have failed.

[drc]

Just a terminology thing, but drive firmware is not "flash"

[Hexel]

HDD Spaz, you may be right, problem looks like Samsung LED13 Servo unlatch error and usually caused by bad head.
btw i`ve got similar flash 12.01C01, probably correct, and check utility also told it have CS error. so i`m not sure in flash error