Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

HDDScan S.M.A.R.T. Report guidance

April 8th, 2010, 6:56

Ok, I got this "HDDScan S.M.A.R.T. Report" after a full low level format, using "Hard Disk Low Level Format Tool" that is saying:

Num Attribute Name Value Worst Raw(hex) Threshold

Green 001 Raw Read Error Rate 200 200 00000000-0000 051

Green 003 Spin Up Time 150 139 00000000-2513 021

Green 004 Start/Stop Count 099 099 00000000-06A7 000

Red X 005 Reallocation Sector Count 111 111 00000000-02C1 140

Green 007 Seek Error Rate 200 200 00000000-0003 000

Green 009 PowerOn Hours Count 093 093 00000000-1627 000

Green 010 Spin Retry Count 100 100 00000000-0000 000

Green 011 Recalibration Retries 100 100 00000000-0000 000

Green 012 Device Power Cycle Count 100 100 00000000-007F 000

Green 192 Power-off retract count 200 200 00000000-0016 000

Green 193 Load/unload cycle count 200 200 00000000-0690 000

Green 194 HDA Temperature 115 088 37 C 000

Yel ! 196 Reallocation Event Count 098 098 00000000-0066 000

Green 197 Current Pending Sector Count 200 200 00000000-0000 000

Yel ! 198 Uncorrectable Sector Count 200 200 00000000-0005 000

Yel ! 199 UltraDMA CRC Error Count 200 200 00000000-0001 000

Green 200 Write Error Rate 200 200 00000000-0000 000


Is this HDD very faulty, or is it still usable? If it is faulty, is it any way to repair it?

Re: HDDScan S.M.A.R.T. Report guidance

April 8th, 2010, 11:21

heya

Red X 005 Reallocation Sector Count 111 111 00000000-02C1 140 = time to lay the drive to rest.

here is the link for u to look at. Gl m8.

http://www.argusmonitor.com/en/smart.php
Post a reply