Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

BAD Sectors, lots of it till SMART gives ERROR

October 24th, 2005, 8:29

Hi there hdd gurus, How to remap the bad UNC & AMNF? Tried mhdd remap and it does remap, but when i run scan remap the problem is still there.. same LBA locations.

Data is important, any idea guys? Thank you.

Re: BAD Sectors, lots of it till SMART gives ERROR

October 24th, 2005, 12:33

Crudeoyl wrote:Hi there hdd gurus, How to remap the bad UNC & AMNF? Tried mhdd remap and it does remap, but when i run scan remap the problem is still there.. same LBA locations.

Data is important, any idea guys? Thank you.


Data? You maybe already destroy some data :(

Before doing something you must understand what is you doing. Old version of mhdd destroy a lot of data then do remap ( don't know how it's worked today, but make any "repair" before save data - not a good idea )

mhdd can only do minor repair for more serious problem only qualified repairman can help...

Re: BAD Sectors, lots of it till SMART gives ERROR

November 6th, 2005, 15:21

Hi guys, I am sorry to hear that.
Just try Easy Recovery Pro to recover your data
good luck.

how to fix unable to write boot.....

November 6th, 2005, 15:25

:cry:

Hi every body, i have problem with my hdd...
after fdisk + format, my hdd unable to write boot.

any conclusion...
thanks b4...
Post a reply