PCB for WD1600JS

[acelow]

need a PCB for a WD1600JS-60NCB1 the firmware I think is HSBANT2CA. the old board is burnt. any help would be great.
Thanks

[poehere]

You can not just swap boards on this one. There is more to it than a simple pcb swap on this one

[fzabkar]

If you upload a detailed photo, one of us may be able to help you repair your board. Many times the problem is only a shorted diode, in which case it can simply be removed. There may also be an open fuse or resistor.

Good luck.

[unknown]

the firmware I think is HSBANT2CA

It's the DCM not the FW.
You have to transfer the original ROM to the new PCB. Your PCB # would be 1335-005 or 1393, I can't remember exactly.

2nd option : send it to a pro.

Good luck

[networkpc3000]

here is demo video for show you how to swap original ROM chip to good PCB.
http://www.youtube.com/watch?v=X2hgiDHiXKM