Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
June 16th, 2010, 9:47
Hello
Can anybody help
What to do, when was interupted the m0,2,2,,,,,22 procedure
on Seagate 7200.11?
It was powered off the drive in 1 second after start m0 command.
Now is not possible to get F3 T>
THANKS for soon reply
June 16th, 2010, 14:04
What tools are you using on this one? Were you sure before doing this that the drive had this error. ACE now has a new script in the program for this problem should follow it if the drive has the standard busy problem. If not you do not have toold this could be a problem and maybe you have bricked your drive.
June 16th, 2010, 15:27
Ann , the problem is that power was cut during m0 command...
June 16th, 2010, 19:15
ddd123 wrote:Hello
Can anybody help
What to do, when was interupted the m0,2,2,,,,,22 procedure
on Seagate 7200.11?
It was powered off the drive in 1 second after start m0 command.
Now is not possible to get F3 T>
THANKS for soon reply
Send it to Seagate / i365. Their data recovery service will probably be free, or would have been free had the drive been received in its original state.
Worth a try, anyway.
June 16th, 2010, 19:28
ddd123 wrote:It was powered off the drive in 1 second after start m0 command.
Now is not possible to get F3 T>
have you try conntact PCB only and check?
Powered by phpBB © phpBB Group.