Fujitsu 2,5" MHS2040AT

[pclab]

Hi there

A problem with this disk.

The disk is not detected, not even by doctor, but it says Ready.
I got a donor PCB and changed the ROM. If I try to read the ROM, I get F3M108.

When trying to load from HDD on the bottom I get ERROR. No operations can be made in the Firmware options.
Read SA MAP, get error too.

Is this Heads? Or....

Thanks

[pcimage]

Listen very carefully when you power up the drive.

Do you actually hear the heads come off the ramp and try to load FW, or does it just spinup but the heads stay put?

Compare it to a good drives' noise.

[pclab]

I don't hear any strange noise... That's odd...
It seems to spin up OK.... No BZZZZ ou tick-tick's....

Not even at first, with the original PCB.

The client said that it had an USB power surge, but nothing seems to be toasted...

[pclab]

No more ideas/hints?

[Alexii]

preamplifier maybe.

[msurgeon]

If you're experienced you should change heads. If that doesn't work then most likely SA is damaged and that's a brick wall.

[pclab]

Hi

Not experiencied yet on changing heads and don't have a donor

Gonna outsource it...

[pclab]

Does anyone have a SA map for this model? Or even firmware?
Thank You

[DR-Kiev]

Does anyone have a SA map for this model? Or even firmware?
Thank You

May be MHS2020AT could help for you?

[pclab]

Does anyone have a SA map for this model? Or even firmware?
Thank You

May be MHS2020AT could help for you?

Maybe. Do you have it?
Thanks

[DR-Kiev]

Does anyone have a SA map for this model? Or even firmware?
Thank You

May be MHS2020AT could help for you?

Maybe. Do you have it?
Thanks

Take.

Attachments

FUJITSU MHS2020AT-8004-NL42T2C12PE0.ZIP

(264.88 KiB) Downloaded 497 times

[pclab]

Thanks. Let's see then...

[ppumkin]

Did you solve it?

[pclab]

Not yet.... Just tomorrow I'll check it.